IDES Prospector Already have an account? Login Here

IDES

Ultramid® B 3GM35 Ebony23227

Polyamide 6

Glass Fiber Reinforcement, 15%; Mineral Filler, 25%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® B 3GM35 Ebony23227 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid B3GM35 Ebony23227 is a 40% combined glass-fiber and mineral reinforced, pigmented black injection molding PA6 grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
  • Mineral Filler, 25% Filler by Weight
  
Additive 
  • Heat Stabilizer
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Flow
  • Good Processability
  • Good Stiffness
  • Good Thermal Aging Resistance
  • Heat Stabilized
  • Low Viscosity
  • Medium Rigidity
  • Oil Resistant
  • Semi Crystalline
Uses 
  • Automotive Applications
  • Handles
  • Industrial Applications
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Break)
psi
 ISO 527-2 2
Tensile Strain (Break)
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
 ISO 75-2 2
Melting Temperature (DSC)
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 3GM35 Ebony23227, Ultramid B 3GM35 Ebony23227, Ultramid® B , Ultramid B, UltramidB3GM35Ebony23227, UltramidB, B 3 GM 35 Ebony 23227, B3GM35 Ebony23227, B3, 3 GM 35 Ebony 23227, B3GM35Ebony23227, 3GM35 Ebony23227, 3GM, GM35, 35Ebony, Ebony23227, 3GM35Ebony23227, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, GM3, 3B
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Medium Rigidity, Good Rigidity, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Semi-Crystalline, Good Flow, Good Processability, Easy Processing, Good Stiffness, Good Thermal Aging Resistance, Thermal Aging Resistant, Low Viscosity.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.