IDES Prospector Already have an account? Login Here

IDES

Zytel® HTN 52G45HSL NC010

HIGH PERFORMANCE POLYAMIDE RESIN

Glass Fiber Reinforcement, 45%

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Zytel® HTN 52G45HSL NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Zytel® HTN52G45HSL NC010 is a 45% glass reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 45% Filler by Weight
Additive 
  • Heat Stabilizer
  • Lubricant
  
RoHS Compliance 
Appearance 
  • Natural Color
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)
  • >PA6T/66-GF45<
Part Marking Code (SAE J1344)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
--
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
--
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
--
%
 ISO 527-2
Flexural Modulus (73°F)
--
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength
       ISO 180/1A
-40°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
        
66 psi, Unannealed
--
°F
 ISO 75-2/B
264 psi, Unannealed
--
°F
 ISO 75-2/A
Melting Temperature 3
--
°F
 ISO 11357-3
CLTE
       ISO 11359-2
Flow: -40 to 73°F
--
in/in/°F
  
Flow: 73 to 131°F
--
in/in/°F
  
Flow: 239 to 392°F
--
in/in/°F
  
Transverse: -40 to 73°F
--
in/in/°F
  
Transverse: 73 to 131°F
--
in/in/°F
  
Transverse: 131 to 392°F
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
--
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dissipation Factor
       IEC 60250
73°F, 100 Hz
 
  
73°F, 1 MHz
 
  
Comparative Tracking Index
--
V
 IEC 60112
Electric Strength (73°F)
--
V/mil
 IEC 60243-1
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 52G45HSL NC010, Zytel HTN 52G45HSL NC010, Zytel® HTN , Zytel HTN, ZytelHTN52G45HSLNC010, ZytelHTN, HTN 52 G 45 HSL NC 010, HTN52G45HSL NC010, HTN52, HTN, 52 G 45 HSL NC 010, HTN52G45HSLNC010, 52G45HSL NC010, 52G, G45, 45HSL, HSLNC, NC010, 52G45HSLNC010, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G52, 52HTN
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 52G45HSL NC010, Zytel HTN 52G45HSL NC010, Zytel® HTN , Zytel HTN, ZytelHTN52G45HSLNC010, ZytelHTN, HTN 52 G 45 HSL NC 010, HTN52G45HSL NC010, HTN52, HTN, 52 G 45 HSL NC 010, HTN52G45HSLNC010, 52G45HSL NC010, 52G, G45, 45HSL, HSLNC, NC010, 52G45HSLNC010, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G52, 52HTN
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum
°F
  
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
310°C/min, First Heat
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.