Osterlene LD-1-919 Osterman Polyethylene, Low Density

Product Description

LD-1-919 is a series of resins designed for a wide variety of industrial film applications where high impact strength and excellent drawdown are needed.
LD-1-919 exhibits good uniformity, ease of processing and good tensile strength.
LD-1-919 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply.

General

Material Status

Commercial: Active

Availability

North America

Features

Food Contact Acceptable

Good Drawdown

Good Processability

High Impact Resistance

Ignition Resistant

Uses

Film

Industrial Applications

Non-specific Food Applications

Agency Ratings

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Films	Nominal Value	Unit	Test Method
Secant Modulus - MD		psi	ASTM D882
Tensile Strength - MD (Yield)		psi	ASTM D882
Tensile Elongation - MD (Yield)		%	ASTM D882
Dart Drop Impact²		g	ASTM D1709
Elmendorf Tear Strength - MD		g	ASTM D1922
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Additional Information
Product LD-1-919: Slip - None, Antiblock - None Product LD-1-919-SMAL: Slip - Medium, Antiblock - Low Product LD-1-919-AM: Slip - None, Antiblock - Medium The value shown as Secant Modulus, ASTM D882, was tested in accordance with ASTM E111.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Osterlene® LD-1-919, Osterlene LD1919, Osterlene® , Osterlene, OsterleneLD1919, LD, LD-1-919, LD1919, LD:1:919, LD/1/919, LD+1+919, LD_1_919, LD 1 919, LD1, 1919, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Osterman, PolyethyleneLowDensity, 1LD
Features
Features may also be described by the following terms: Good Drawdown, Good draw down, Good Processability, Easy Processing, High Impact Resistance.
Uses
Uses may also be described by the following terms: Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²F50

Osterlene® LD-1-919

Low Density Polyethylene

Supplied by Osterman & Company