Osterlene LD-2-919 Osterman Polyethylene, High Density

Product Description

LD-2-919 is a series of homopolymer resins especially designed for industrial and consumer packaging, and liner and bag applications.
LD-2-919 has an excellent balance of processability, toughness and drawdown.
LD-2-919 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply.

General

Material Status

Commercial: Active

Availability

North America

Features

Food Contact Acceptable

Good Drawdown

Good Processability

Good Toughness

Uses

Bags

Food Packaging

Liners

Non-specific Food Applications

Packaging

Agency Ratings

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Films	Nominal Value	Unit	Test Method
Secant Modulus - 1% Secant, MD		psi	ASTM D882
Tensile Strength - MD (Yield)		psi	ASTM D882
Tensile Elongation - MD (Yield)		%	ASTM D882
Dart Drop Impact²		g	ASTM D1709
Elmendorf Tear Strength - MD		g	ASTM D1922
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Additional Information
The value shown as Secant Modulus, ASTM D882, was tested in accordance with ASTM E111. Product LD-2-919: Slip(ppm) - 0, Antiblock(ppm) - 0 Product LD-2-919-SA: Slip(ppm) - 500L, Antiblock(ppm) - 4500H Product LD-2-919-SLAUL: Slip(ppm) - 500L, Antiblock(ppm) - 10000UH Product LD-2-919-AH: Slip(ppm) - 0, Antiblock(ppm) - 4000H
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Osterlene® LD-2-919, Osterlene LD2919, Osterlene® , Osterlene, OsterleneLD2919, LD, LD-2-919, LD2919, LD:2:919, LD/2/919, LD+2+919, LD_2_919, LD 2 919, LD2, 2919, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Osterman, PolyethyleneHighDensity, 2LD
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Toughness, Tough, Good Drawdown, Good draw down.
Uses
Uses may also be described by the following terms: Food Packaging, Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²F50

Osterlene® LD-2-919

High Density Polyethylene

Supplied by Osterman & Company