IDES Prospector Already have an account? Login Here

IDES

Osterlene® LLDO-.9-918

Linear Low Density Polyethylene

Supplied by Osterman & Company

The technical datasheet with complete property values for Osterlene® LLDO-.9-918 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LLDO-.9-918 has features for easy processability, high toughness and strength and excellent seal properties.
LLDB-.9-918 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Good Toughness
  • High Strength
Uses 
  • Film
  • Non-specific Food Applications
  
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus - 1% Secant, MD
psi
 ASTM D882
Tensile Strength - MD
     ASTM D882
Yield
psi
  
Break
psi
  
Tensile Elongation - MD (Break)
%
 ASTM D882
Dart Drop Impact 2
g
 ASTM D1709A
Elmendorf Tear Strength - MD
g
 ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Osterlene® LLDO-.9-918, Osterlene LLDO9918, Osterlene® , Osterlene, OsterleneLLDO9918, LLDO, LLDO-.9-918, LLDO9918, LLDO:.9:918, LLDO/.9/918, LLDO+.9+918, LLDO_.9_918, LLDO .9 918, LLDO9, 9918, LLDO_9_918, LLDO 9 918, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Osterman, PolyethyleneLinearLowDensity, 9LLDO
Features
Features may also be described by the following terms: Good Toughness, Tough, High Strength.
Uses
Uses may also be described by the following terms: Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.