IDES Prospector Already have an account? Login Here

IDES

Osterlene® PPC-35-1.8-N

Polypropylene Copolymer

Supplied by Osterman & Company

The technical datasheet with complete property values for Osterlene® PPC-35-1.8-N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPC-35-1.8-N is a high-flow, high-stiffness, polypropylene copolymer formulated for injection molding applications requiring a fast fill, high stiffness and moderate impact strength.
PPC-35-1.8-N has been specially formulated with a nucleator and mold release for improved cycle times in thin-wall injection molding.
PPC-35-1.8-N meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulations allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Mold Release
  • Nucleating Agent
  
Features 
  • Copolymer
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Mold Release
  • High Flow
  • High Stiffness
  • Medium Impact Resistance
  • Nucleated
Uses 
  • Non-specific Food Applications
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (0°F)
ft·lb/in
 ASTM D256
Gardner Impact (73°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Additional Information
The value listed as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Osterlene® PPC-35-1.8-N, Osterlene PPC3518N, Osterlene® , Osterlene, OsterlenePPC3518N, PPC, PPC 35 1 8 N, PPC-35-1.8-N, PPC3518N, PPC:35:1.8:N, PPC/35/1.8/N, PPC+35+1.8+N, PPC_35_1.8_N, PPC 35 1.8 N, PPC35, 351, 18, 8N, PPC_35_18_N, PPC 35 18 N, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Osterman, PolypropyleneCopolymer, PPCopolymer, 35PPC
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Stiffness, Medium Impact Resistance, Good Mold Release, Easy Release, Good Demolding, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.