IDES Prospector Already have an account? Login Here

IDES

Osterlene® PPC-.75-NB

Polypropylene Impact Copolymer

Supplied by Osterman & Company

The technical datasheet with complete property values for Osterlene® PPC-.75-NB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPC-.75-NB is a polypropylene nucleated high stiffness and high impact copolymer formulated for extrusion applications such as blow molding, profile, sheet and blown film.
PPC-.75-NB meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply.
PPC-.75-NB offers the benefits of gas-phase technology along with high stiffness and high impact strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Nucleating Agent
Features 
  • Food Contact Acceptable
  • High Impact Resistance
  • High Stiffness
  • Impact Copolymer
  • Nucleated
Uses 
  • Blow Molding Applications
  • Film
  • Non-specific Food Applications
  • Profiles
  • Sheet
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Extrusion Blow Molding
  • Film Extrusion
  • Profile Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
0°F
ft·lb/in
  
73°F
 
  
Unnotched Izod Impact (0°F)
 
 ASTM D256
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
The value listed as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Osterlene® PPC-.75-NB, Osterlene PPC75NB, Osterlene® , Osterlene, OsterlenePPC75NB, PPC, PPC-.75-NB, PPC75NB, PPC:.75:NB, PPC/.75/NB, PPC+.75+NB, PPC_.75_NB, PPC .75 NB, PPC75, 75NB, PPC_75_NB, PPC 75 NB, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Osterman, PolypropyleneImpactCopolymer, PPImpactCopolymer, 75PPC
Features
Features may also be described by the following terms: High Stiffness, High Impact Resistance, Impact Copolymer.
Uses
Uses may also be described by the following terms: Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.