DENYL 6 3040 H Vamp Tech Polyamide 6 (Glass Fiber Reinforcement, 30%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 30% Filler by Weight
RoHS Compliance
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Water Absorption
Saturation		%	ASTM D570
Saturation, 73°F		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Yield)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648, ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B, ASTM D1525²
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
0.0630 in
0.126 in
Additional Information
Ball Penetration Test, IEC 60695-10-2, 125°C: PASS Ball Penetration Test, IEC 60695-10-2, 165°C: PASS Density, ASTM D792: 1.315 g/cm³ Density, ISO 1183: 1.315 g/cm³ Notched Izod, D256: 20 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 6 3040 H, DENYL , DENYL63040H, 6 3040 H, 63040, 3040H, 63040H, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Vamp Tech, Polyamide6, Nylon6, 30406
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

²Loading 2 (50 N)

DENYL 6 3040 H