DENYL 6 3010 T Vamp Tech Polyamide 6 (Glass Fiber Reinforcement, 30%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 30% Filler by Weight
Features	High Heat Resistance
RoHS Compliance

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Water Absorption
24 hr		%	ASTM D570
73°F, 24 hr		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength		ft·lb/in²	ISO 180/1A
Notched Izod Impact		ft·lb/in²	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Max. Continuous Use Temperature		°F	Internal Method
Vicat Softening Temperature		°F	ISO 306/B, ASTM D1525²
Ball Pressure Test			IEC 60695-10-2
257°F
329°F
Service Temperature		°F	IEC 60216
Electrical	Nominal Value	Unit	Test Method
Dielectric Strength		V/mil	ASTM D149, IEC 60243-1
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
0.0630 in
0.126 in
Oxygen Index		%	ASTM D2863, ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 6 3010 T, DENYL , DENYL63010T, 6 3010 T, 63010, 3010T, 63010T, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Vamp Tech, Polyamide6, Nylon6, 30106
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Heat Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

²Loading 2 (50 N)

DENYL 6 3010 T