VAMPAMID 66 2526 V0 40 T Vamp Tech Polyamide 66 (Glass Fiber Reinforcement, 25%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 25% Filler by Weight
RoHS Compliance

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Water Absorption
24 hr		%	ASTM D570
73°F, 24 hr		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1eA
Notched Izod Impact Strength		ft·lb/in²	ISO 180/1A
Notched Izod Impact		ft·lb/in²	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648, ISO 75-2/A
Max. Continuous Use Temperature		°F	Internal Method
Vicat Softening Temperature		°F	ISO 306/B, ASTM D1525²
Ball Pressure Test			IEC 60695-10-2
257°F
329°F
Service Temperature		°F	IEC 60216
Electrical	Nominal Value	Unit	Test Method
Dielectric Strength		V/mil	ASTM D149, IEC 60243-1
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
0.0630 in
0.126 in
Glow Wire Flammability Index		°F	IEC 60695-2-12
Glow Wire Ignition Temperature		°F	IEC 60695-2-13
Oxygen Index		%	ASTM D2863, ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VAMPAMID 66 2526 V0 40 T, VAMPAMID , VAMPAMID662526V040T, 66 2526 V 0 40 T, 66 2526 V0 40 T, 662526, 2526V, V0, 040, 40T, 662526V040T, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Vamp Tech, Polyamide66, Nylon66, 252666
Generic Name
Generic Name may also be described by the following terms: PA66.

Injection	Nominal Value	Unit
Drying Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Loading 2 (50 N)

VAMPAMID 66 2526 V0 40 T

Polyamide 66

Glass Fiber Reinforcement, 25%

Supplied by Vamp Tech