VAMPLEN M 2025 O V0 DF Vamp Tech Polypropylene Homopolymer (Mineral Filler, 20%)

General

Material Status

Availability

Filler / Reinforcement

Features

RoHS Compliance

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)		g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Water Absorption
24 hr		%	ASTM D570
73°F, 24 hr		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact Strength		ft·lb/in²	ISO 180
Notched Izod Impact		kJ/m²	ASTM D256
Unnotched Izod Impact		ft·lb/in²	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Max. Continuous Use Temperature		°F	Internal Method
Vicat Softening Temperature		°F	ISO 306/B, ASTM D1525²
Ball Pressure Test (257°F)			IEC 60695-10-2
Service Temperature		°F	IEC 60216
Electrical	Nominal Value	Unit	Test Method
Dielectric Strength		V/mil	ASTM D149, IEC 60243-1
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
Glow Wire Flammability Index		°F	IEC 60695-2-12
Oxygen Index		%	ASTM D2863, ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VAMPLEN M 2025 O V0 DF, VAMPLEN , VAMPLENM2025OV0DF, M 2025 O V 0 DF, M 2025 O V0 DF, M2025, 2025O, OV, V0, 0DF, M2025OV0DF, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Vamp Tech, PolypropyleneHomopolymer, PPHomopolymer, 2025M
Features
Features may also be described by the following terms: Good Stiffness.

Notes

¹Typical properties: these are not to be construed as specifications.

²Loading 2 (50 N)

VAMPLEN M 2025 O V0 DF