IDES Prospector Already have an account? Login Here

IDES

NORYL GTX* EXNX0080 Resin

Polyphenylene Sulfide + PPE

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for NORYL GTX* EXNX0080 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Noryl APS* EXNX0080 resin is a glass filled, high performance blend of PPE/PPS that exhibits an excellent balance of high-heat resistance, strength, flame retardant, and conductivity. This grade can be electro-statically painted or powder coated without the need for a conductive primer. The resin is injection moldable and only available in black.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Conductive
  • Flame Retardant
  • High Heat Resistance
  • High Strength
  • Paintable
  • Statically Conductive
Appearance 
  • Black
Physical
Nominal Value
Unit
Test Method
Specific Gravity      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/2.16 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (300°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Water Absorption     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus      
1.97 in Span 4
psi
 ASTM D790
-- 5
psi
 ISO 178
Flexural Strength      
-- 5, 6
psi
 ISO 178
Yield, 1.97 in Span 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 7 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 8
ft·lb/in²
 ISO 180/1A
73°F 8
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 3.94 in Span 9
°F
 ISO 75-2/Ae
Vicat Softening Temperature      
--
°F
 ASTM D1525 10, ISO 306/B120 10
--
°F
 ISO 306/B50
CLTE     ASTM E831, ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL GTX* EXNX0080 Resin, NORYL GTX EXNX0080 Resin, NORYL GTX* , NORYL GTX, NORYLGTXEXNX0080Resin, NORYLGTX, EXNX 0080 Resin, EXNX0080 Resin, EXNX0080, 0080Resin, EXNX0080Resin, Polyphenylene Sulfide + PPE, Polyphenylene Sulfide PPE, Polyphenylene Sulfide : PPE, Polyphenylene Sulfide / PPE, Polyphenylene Sulfide - PPE, Polyphenylene Sulfide _ PPE, Polyphenylene Sulfide PPE, PPS+PPE, PPSPPE, PPS:PPE, PPS/PPE, PPS-PPE, PPS_PPE, PPS PPE, Polyphenylene Sulfide, PPS, SABIC IP Asia, PolyphenyleneSulfidePPE, PolyphenyleneSulfide, PolyphenyleneSulfide_PPE, 0080EXNX
Features
Features may also be described by the following terms: High Heat Resistance, High Strength.
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
6Yield
780*10*4 sp=62mm
880*10*4
9120*10*4 mm
10Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.