IDES Prospector Already have an account? Login Here

IDES

Infino XF-4150

Polyphthalamide

Glass Fiber Reinforcement

Supplied by Samsung, a division of Cheil Industries

The technical datasheet with complete property values for Infino XF-4150 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPA/GF material with high stiffness that is applied to the exterior material of slim slide phone
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Central America
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • High Stiffness
Physical
Nominal Value
Unit
Test Method
Specific Gravity (Natural)
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (315°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (Saturation, 73°F)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in, ALL
 
  
0.118 in, ALL
 
  
Flammability Classification
     IEC 60695-11-10, -20
0.0315 in
 
  
0.118 in
 
  
UL File Number
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0315 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0315 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0315 in
°F
  
0.118 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Infino XF-4150, Infino XF4150, Infino , InfinoXF4150, XF, XF-4150, XF4150, XF:4150, XF/4150, XF+4150, XF_4150, XF 4150, Polyphthalamide, PPA, Polyamide, Nylon, Samsung, 4150XF
Features
Features may also be described by the following terms: High Stiffness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.