IDES Prospector Already have an account? Login Here

IDES

Texin® 1193

Thermoplastic Polyurethane Elastomer (Polyether)

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Texin® 1193 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Texin DP7-1193 resin is an aromatic polyether-based thermoplastic polyurethane with a Shore hardness of approximately 65D. It can be processed by injection molding, extrusion or blow molding. Texin DP7-1193 resin offers outstanding abrasion resistance, impact strength, toughness, and flexibility.

Applications include belting, hose, gaskets, and miscellaneous molded articles. However, as with any product, use of Texin DP7-1193 resin in a given application must be tested (including field testing,etc.) in advance by the user to determine suitability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Abrasion Resistance
  • Good Flexibility
  • Good Impact Resistance
  • Good Toughness
  
Uses 
  • Belts/Belt Repair
  • Gaskets
  • Hose
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow: 0.100 in
in/in
 ASTM D955
Across Flow: 0.100 in
in/in
 ASTM D955
Across Flow: 0.100 in
%
 ISO 294-4
Flow: 0.100 in
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
     ASTM D790, ISO 178
73°F
psi
  
158°F
psi
  
Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel)
mg
 ASTM D1044
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412, ISO 37
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Yield)
psi
 ASTM D412, ISO 37
Tensile Elongation (Break)
%
 ASTM D412, ISO 37
Tear Strength
      
-- 2
lbf/in
 ASTM D624
-- 3
lbf/in
 ISO 34-1
Compression Set
     ASTM D395, ISO 815
73°F, 22.0 hr
%
  
158°F, 22.0 hr
%
  
Bayshore Resilience
%
 ASTM D2632
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240, ISO 868
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 DSC
Vicat Softening Temperature
°F
 ISO 306/A50, ASTM D1525 4
Additional Information
The value listed as Taber Abrasion Resistance ASTM D1044, was tested in accordance with ASTM D3489 (ISO 4649).
Compression Set: postcured for 16 hours @ 230°F, not postcuring will result in higher values.
The values listed as, Mold Shirnkage ISO 294-4, were tested in accordance with ISO 2577.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Texin® 1193, Texin 1193, Texin® , Texin, Texin1193, 1193, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, Bayer, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Impact Resistance, Good Toughness, Tough, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Belts/Belt Repair, Belt Repair, Gaskets, Gasketing.
Injection
Nominal Value
Unit
 
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Injection Notes
Hold Pressure: 60 - 80% of Injection Pressure
Inlet Air Dew Point: -20°F or lower
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
3Method C, Crescent
4Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.