IDES Prospector Already have an account? Login Here

IDES

Infino EN-1052

Polycarbonate

Supplied by Samsung, a division of Cheil Industries

The technical datasheet with complete property values for Infino EN-1052 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Non-halogen flame-retardant material with high heat resistance that can be applied to battery charger
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Central America
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Halogen Free
  • High Heat Resistance
Physical
Nominal Value
Unit
Test Method
Specific Gravity (Natural)
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/10.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
psi
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.250 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ISO 306/B
Ball Pressure Test (266°F, 0.118 in)
 
 IEC 60695-10-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in, ALL
 
  
0.0591 in, ALL
 
  
0.118 in, ALL
 
  
Flammability Classification
     IEC 60695-11-10, -20
0.0295 in
 
  
0.0591 in
 
  
0.118 in
 
  
UL File Number
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0295 in
°F
  
0.0591 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0295 in
°F
  
0.0591 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0295 in
°F
  
0.0591 in
°F
  
0.118 in
°F
  
Hot-wire Ignition (HWI) (PLC)
     UL 746
0.0295 in
 
  
0.0591 in
 
  
High Amp Arc Ignition (HAI) (PLC)
     UL 746
0.0295 in
 
  
0.0591 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Infino EN-1052, Infino EN1052, Infino , InfinoEN1052, EN, EN-1052, EN1052, EN:1052, EN/1052, EN+1052, EN_1052, EN 1052, Polycarbonate, PC, Samsung, 1052EN
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, High Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.11 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.