IDES Prospector Already have an account? Login Here

IDES

Formolene® 5143C

Polypropylene Homopolymer

Supplied by Formosa Plastics Corporation, U.S.A.

The technical datasheet with complete property values for Formolene® 5143C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Formolene 5143C is a polypropylene homopolymer designed for sheet and thermoforming
applications, which require exceptional clarity. It contains a unique combination of stabilizers,
nucleators and anti-stats that give it an excellent balance of stiffness and impact strength.
Formolene 5143C offers advantages in processing over other polypropylenes used for
thermoforming, including a broad forming window and fast setup time. It has been created for
applications requiring higher clarity and lower haze than the 5143H grade offered by Formosa
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antistatic
  • Nucleating Agent
 
Features 
  • Antistatic
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Stiffness
  • High Clarity
  • Homopolymer
  • Nucleated
Uses 
  • Sheet
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Thermoforming
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation 2 (Yield)
%
ASTM D638
Flexural Modulus - 1% Secant 3
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Formolene® 5143C, Formolene 5143C, Formolene® , Formolene, Formolene5143C, 5143 C, 5143C, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Formosa Plastics, PolypropyleneHomopolymer, PPHomopolymer, C5143
Features
Features may also be described by the following terms: High Clarity, Good Stiffness, Good Impact Resistance.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.