IDES Prospector Already have an account? Login Here

IDES

Halene H R5801

High Density Polyethylene

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene H R5801 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
R5801 is a HDPE grade for stretched tape / raffia application produced by the Mitsui CX Technology.

This grade can be used for stretched tape / raffia for woven sacks and tarpaulin.

R5801 is characterized by excellent processability and high mechanical strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Processability
  • High Strength
  
Uses 
  • Tape
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3
     ASTM D638
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Elongation 3 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus (Compression Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact 4 (73°F, Compression Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ASTM D3418
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene H R5801, Halene H , HaleneHR5801, HaleneH, HR 5801, HR5801, R 5801, R5801, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Haldia Petrochem, PolyethyleneHighDensity, 5801R, 5801HR
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Strength.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Quench Temperature: 25°C
Notes
1Typical properties: these are not to be construed as specifications.
223°C
32.0 in/min
4Method A
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.