IDES Prospector Already have an account? Login Here

IDES

Orevac® 18319

Linear Low Density Polyethylene

Supplied by Arkema

The technical datasheet with complete property values for Orevac® 18319 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OREVAC 18319 is a maleic anhydride grafted polyethylene used in the manufacturing of multi-layer aluminium panels.
OREVAC 18319 is mainly used in aluminium panels to have good adhesion performances between PE core and aluminium sheet.
OREVAC 18319 can be extruded in a cast process as a mono-layer film to laminated between a PE and an aluminium sheets. It is also possible to extrude is in a multi-layer structure (adhesive/PE/adhesive) then laminated between aluminium sheets.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Adhesion
Uses 
  • Adhesives
  • Laminates
  
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield, 0.00295 in
psi
  
Break, 0.00295 in
psi
  
Tensile Elongation 2
     ASTM D638
Yield, 0.00295 in
%
  
Break, 0.00295 in
%
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Orevac® 18319, Orevac 18319, Orevac® , Orevac, Orevac18319, 18319, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Arkema, PolyethyleneLinearLowDensity
Features
Features may also be described by the following terms: Good Adhesion.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Fittings - Channels: 240-250°C
Notes
1Typical properties: these are not to be construed as specifications.
20.39 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.