IDES Prospector Already have an account? Login Here

IDES

Orevac® 18365-S

Linear Low Density Polyethylene

Supplied by Arkema

The technical datasheet with complete property values for Orevac® 18365-S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OREVAC 18365-S is grafted maleic anhydride polyethylene used in manufacturing of multilayer oxygen barrier tubes
OREVAC 18365-S is mainly used in multi-layer tube to have good adhesion between PEX, PE, PA and EVOH. OREVAC 18365-S combined with SOARNOL® from NIPPON GOSHEI provides very good oxygen barrier. These tubes are used in plumbing, sanitary, heating floor and also industrial applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Uses 
  • Hose
  • Industrial Applications
  • Plumbing Parts
  • Tubing
  
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638, ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525, ISO 306
Melting Temperature
°F
 DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Orevac® 18365-S, Orevac 18365S, Orevac® , Orevac, Orevac18365S, 18365, 18365-S, 18365S, 18365:S, 18365/S, 18365+S, 18365_S, 18365 S, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Arkema, PolyethyleneLinearLowDensity, S18365
Uses
Uses may also be described by the following terms: Tubing, Tube.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Fittings - Channels: 220-230°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.