|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 1.0 mil, Cast Film
|
|
psi
|
|
|
1% Secant, TD: 1.0 mil, Cast Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Yield, 1.0 mil, Cast Film
|
|
psi
|
|
|
TD: Yield, 1.0 mil, Cast Film
|
|
psi
|
|
|
MD: Break, 1.0 mil, Cast Film
|
|
psi
|
|
|
TD: Break, 1.0 mil, Cast Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.0 mil, Cast Film
|
|
%
|
|
|
TD: Break, 1.0 mil, Cast Film
|
|
%
|
|
|
Dart Drop Impact 2 (1.0 mil, Cast Film)
|
|
g
|
ASTM D1709A |
|
Elmendorf Tear Strength
|
|
|
ASTM D1922 |
|
MD: 1.0 mil, Cast Film
|
|
g
|
|
|
TD: 1.0 mil, Cast Film
|
|
g
|
|
|
Gloss (45°, 1.00 mil, Cast Film)
|
|
|
ASTM D2457 |
|
Typical 1.0 mil cast film properties on unformulated grade (no slip/no anti block) fabricated on a 3.5" extruder at 13 lbs/hr/in with a 520° F melt temperature and 70° F chill roll temperature.
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Westlake LLDPE LF 1041, Westlake LLDPE , WestlakeLLDPELF1041, WestlakeLLDPE, LLDPELF 1041, LLDPE, LLDPELF1041, LF 1041, LF1041, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Westlake Chem, PolyethyleneLinearLowDensity, 1041LF, 1041LLDPELF
|
|
Features may also be described by the following terms: Good Heat Seal, Butene Comonomer.
|
|
Uses may also be described by the following terms: Food Packaging.
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
|