|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 1.3 mil, Blown Film
|
|
psi
|
|
|
1% Secant, TD: 1.3 mil, Blown Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Break, 1.3 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 1.3 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.3 mil, Blown Film
|
|
%
|
|
|
TD: Break, 1.3 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact (1.3 mil, Blown Film)
|
|
g
|
ASTM D1709 |
|
Elmendorf Tear Strength
|
|
|
ASTM D1922 |
|
MD: 1.3 mil, Blown Film
|
|
g
|
|
|
TD: 1.3 mil, Blown Film
|
|
g
|
|
|
Gloss (45°, 1.25 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (1.25 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
Blow up ratio: 1.5 to 1 or higher
The values listed as Tensile Strength @ Break MD ASTM D882, Tensile Strength @ Break TD ASTM D882, Elongation @ Break MD ASTM D882, and Elongation @ Break TD ASTM D882, were tested in accordance with ASTM D638.
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Westlake MDPE EB 169, Westlake MDPE , WestlakeMDPEEB169, WestlakeMDPE, MDPEEB 169, MDPE, MDPEEB169, EB 169, EB169, Polyethylene, Medium Density, Polyethylene Medium Density, Polyethylene, PE, Westlake Chem, PolyethyleneMediumDensity, 169EB, 169MDPEEB
|
|
Features may also be described by the following terms: Good Stiffness, Good Processability, Easy Processing.
|
|
Uses may also be described by the following terms: Food Wrap, Food Packaging, Food Applications.
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
|