IDES Prospector Already have an account? Login Here

IDES

Lustran® SAN GF30

Styrene Acrylonitrile

Glass Fiber Reinforcement

Supplied by Styrolution (Thailand) Co. Ltd.

The technical datasheet with complete property values for Lustran® SAN GF30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Glass fiber reinforced.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Across Flow (0.118 in)
%
 ISO 2577
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/50
Flexural Modulus 2 (73°F)
psi
 ISO 178
Flexural Strength 2 (73°F)
psi
 ISO 178
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: Lustran Polymers Asia Pacific

Product names can be difficult to match. You may have searched any one of these terms to find this product: Lustran® SAN GF30, Lustran SAN GF30, Lustran® SAN , Lustran SAN, LustranSANGF30, LustranSAN, SANGF 30, SANGF30, SAN, GF 30, GF30, Styrene Acrylonitrile, Styrolution AP, StyreneAcrylonitrile, 30GF, 30SANGF
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.