IDES Prospector Already have an account? Login Here

IDES

Amilan® CM1003G30

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Toray Resin Company

The technical datasheet with complete property values for Amilan® CM1003G30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Abrasion Resistance
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow: 0.118 in
%
  
Flow: 0.118 in
%
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Taber Abrasion Resistance (1000 Cycles)
mg
 ASTM D1044
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 73°F)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
CLTE - Flow
in/in/°F
 ISO 11359-2
Additional Information
Coefficient of Friction, vs metal without lubrication, Suzuki method: 0.2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amilan® CM1003G30, Amilan CM1003G30, Amilan® , Amilan, AmilanCM1003G30, CM 1003 G 30, CM1003G30, CM1003, 1003G, G30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Toray, Polyamide6, Nylon6, 1003CM
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.