IDES Prospector Already have an account? Login Here

IDES

Ateva® 1807ASB

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1807ASB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This resin is suitable for film extrusion and coextrusion with other polymers where superior strength and good heat seal characterisitcs are required.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antioxidant
  • High Antiblock
  • High Slip
Features 
  • Antioxidant
  • Good Heat Seal
  • High Antiblocking
  • High Slip
  • High Strength
Uses 
  • Film
  • Packaging
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Films
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D882A
MD: Yield, 5.1 mil
psi
  
TD: Yield, 5.1 mil
psi
  
MD: Break, 5.1 mil
psi
  
TD: Break, 5.1 mil
psi
  
Tensile Elongation 2
     ASTM D882A
MD: Break, 5.1 mil
%
  
TD: Break, 5.1 mil
%
  
Dart Drop Impact 3 (0.98 mil)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Additional Information
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1807ASB, Ateva 1807ASB, Ateva® , Ateva, Ateva1807ASB, 1807 ASB, 1807ASB, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer, ASB1807
Features
Features may also be described by the following terms: High Antiblocking, High Antiblock, High Strength, Good Heat Seal, High Slip.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
3F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.