PENTAMID A GV35 HYD schwarz PENTAC Polymer GmbH Polyamide 66 (Glass Fiber Reinforcement, 35%)

Product Description

Normal viscosity, heat and hydrolysis stabilised polyamide 66, 35% glass fiber reinforced

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement, 35% Filler by Weight

Additive

Heat Stabilizer

Hydrolysis Resistant

Features

Good Stiffness

Heat Stabilized

Ultra High Toughness

Uses

Housings

Appearance

Black

Forms

Pellets

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow		--	%
Flow		--	%
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Viscosity Number		--	cm³/g	ISO 307
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2/1
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus		--	psi	ISO 178
Flexural Strength		--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179/1eU
Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness (H 961/30)		--	psi	ISO 2039-1
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
Electrical	Dry	Conditioned	Unit	Test Method
Relative Permittivity (1 MHz)		--		IEC 60250
Comparative Tracking Index		--	V	IEC 60112
Electric Strength (0.0394 in)		--	V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0630 in		--
0.126 in		--
Additional Information
Dry	ISO Description: PA66, MHWRC, 14-110 N, GF35 The value listed as Melting Point, ISO 3146, was tested in accordance with ISO 11357.
Conditioned	ISO Description: PA66, MHWRC, 14-110 N, GF35
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTAMID A GV35 HYD schwarz, PENTAMID A , PENTAMIDAGV35HYDschwarz, PENTAMIDA, AGV 35 HYD schwarz, AGV35 HYD schwarz, AGV35, GV 35 HYD schwarz, AGV35HYDschwarz, GV35 HYD schwarz, GV35, 35HYD, HYDschwarz, GV35HYDschwarz, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Polyamide66, Nylon66, 35GV, 35AGV
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Stiffness, Ultra High Toughness.
Uses
Dry	Uses may also be described by the following terms: Housings, Housing.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTAMID A GV35 HYD schwarz, PENTAMID A , PENTAMIDAGV35HYDschwarz, PENTAMIDA, AGV 35 HYD schwarz, AGV35 HYD schwarz, AGV35, GV 35 HYD schwarz, AGV35HYDschwarz, GV35 HYD schwarz, GV35, 35HYD, HYDschwarz, GV35HYDschwarz, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Polyamide66, Nylon66, 35GV, 35AGV

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Suggested Max Regrind		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Holding Pressure		psi
Screw L/D Ratio
Screw Compression Ratio

Notes

¹Typical properties: these are not to be construed as specifications.

PENTAMID A GV35 HYD schwarz

Polyamide 66

Glass Fiber Reinforcement, 35%

Supplied by PENTAC Polymer GmbH