IDES Prospector Already have an account? Login Here

IDES

RTP Compounds 1107 TFE 10

Polyethylene Terephthalate

Glass Fiber Reinforcement, 40%

Supplied by RTP Company

The technical datasheet with complete property values for RTP Compounds 1107 TFE 10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Warning: The status of this material is 'Commercial: Limited Issue'

The data for this material has not been recently verified.
Please contact RTP Company for current information prior to specifying this grade.

The coefficient of friction was tested on a Falex Model No.6 Wear Testing Machine at 50 FPM, 2000 PV, against C1018 steel of hardness 15-25 Rockwell C, 14-17 micro smoothness. This material offers an excellent balance of strength, heat resistance and toughness in a wear resistant composite.
General  
Material Status 
  • Limited Issue
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Additive 
  • PTFE Lubricant (10%)
Features 
  • Good Toughness
  • Good Wear Resistance
  • High Heat Resistance
  • High Strength
  • Lubricated
RoHS Compliance 
Appearance 
  • Black
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Coefficient of Friction (vs. Metal - Dynamic)
 
 ASTM D1894
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in, Values per RTP Company testing.)
 
 UL 94
Additional Information
Molding Shrinkage, Linear-Flow, ASTM D955, 6.35mm: 2mm/m.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RTP Compounds 1107 TFE 10, RTP Compounds , RTPCompounds1107TFE10, RTPCompounds, Compounds 1107 TFE 10, Compounds1107 TFE 10, Compounds1107, Compounds, Compounds1107TFE10, 1107 TFE 10, 1107TFE, TFE10, 1107TFE10, Polyethylene Terephthalate, PET, Polyester, RTP, PolyethyleneTerephthalate, TFE1107, 1107Compounds
Features
Features may also be described by the following terms: High Heat Resistance, High Strength, Good Toughness, Tough, Good Wear Resistance, Wear Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.