IDES Prospector Already have an account? Login Here

IDES

PENTAMID AHT H1 ungefärbt

Polyamide 46

Supplied by PENTAC Polymer GmbH

The technical datasheet with complete property values for PENTAMID AHT H1 ungefärbt is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyamide 4.6
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Forms 
  • Pellets
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Molding Shrinkage
       ISO 294-4
Across Flow
--
%
  
Flow
--
%
  
Water Absorption
       ISO 62
Saturation, 73°F
--
%
  
Equilibrium, 73°F, 50% RH
--
%
  
Viscosity Number
--
cm³/g
 ISO 307
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Flexural Modulus
--
psi
 ISO 178
Flexural Strength
--
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Hardness
Dry
Conditioned
Unit
Test Method
Ball Indentation Hardness (H 358/30)
--
psi
 ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
        
66 psi, Unannealed
--
°F
 ISO 75-2/B
264 psi, Unannealed
--
°F
 ISO 75-2/A
Melting Temperature
--
°F
 ISO 11357-3
Electrical
Dry
Conditioned
Unit
Test Method
Relative Permittivity (1 MHz)
--
 
 IEC 60250
Comparative Tracking Index
--
V
 IEC 60112
Electric Strength (0.0394 in)
--
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
       UL 94
0.0630 in
--
 
  
0.126 in
--
 
  
Additional Information
Dry
Conditioned
Unit
Test Method
ISO Type
 
 ISO 1874
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTAMID AHT H1 ungefärbt, PENTAMID AHT , PENTAMIDAHTH1ungefärbt, PENTAMIDAHT, AHTH 1 ungef rbt, AHTH1 ungefärbt, AHTH1, AHT, H 1 ungef rbt, AHTH1ungefärbt, H1 ungefärbt, H1, 1ungef, ungefrbt, H1ungefärbt, Polyamide 46, Nylon 46, Polyamide, Nylon, pa46, Polyamide46, Nylon46, 1H, 1AHTH
Generic Name
Dry
Generic Name may also be described by the following terms: PA46.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTAMID AHT H1 ungefärbt, PENTAMID AHT , PENTAMIDAHTH1ungefärbt, PENTAMIDAHT, AHTH 1 ungef rbt, AHTH1 ungefärbt, AHTH1, AHT, H 1 ungef rbt, AHTH1ungefärbt, H1 ungefärbt, H1, 1ungef, ungefrbt, H1ungefärbt, Polyamide 46, Nylon 46, Polyamide, Nylon, pa46, Polyamide46, Nylon46, 1H, 1AHTH

Generic Name may also be described by the following terms: PA46.
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.