PENTAMID B GV10 GK20 H schwarz PENTAC Polymer GmbH Polyamide 6 (Glass Bead, 20%; Glass Fiber Reinforcement, 10%)

Product Description

Normal viscosity, heat stabilised polyamide 6, 10% glass fiber and 20% glass bead reinforced

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Bead, 20% Filler by Weight

Glass Fiber Reinforcement, 10% Filler by Weight

Additive

Heat Stabilizer

Features

Heat Stabilized

Low Warpage

Uses

Connectors

Appearance

Black

Forms

Pellets

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow		--	%
Flow		--	%
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Viscosity Number		--	cm³/g	ISO 307
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2/1
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179/1eU
Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness (H 961/30)		--	psi	ISO 2039-1
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
Electrical	Dry	Conditioned	Unit	Test Method
Relative Permittivity (1 MHz)		--		IEC 60250
Comparative Tracking Index		--	V	IEC 60112
Electric Strength (0.0394 in)		--	V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0630 in		--
0.126 in		--
Additional Information
Dry	ISO Description: PA6, MHRC, 14-060 N, GF10+GB20 The value listed as Melting Point, ISO 3146, was tested in accordance with ISO 11357.
Conditioned	ISO Description: PA6, MHRC, 14-060 N, GF10+GB20
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTAMID B GV10 GK20 H schwarz, PENTAMID B , PENTAMIDBGV10GK20Hschwarz, PENTAMIDB, BGV 10 GK 20 H schwarz, BGV10 GK20 H schwarz, BGV10, GV 10 GK 20 H schwarz, BGV10GK20Hschwarz, GV10 GK20 H schwarz, GV10, 10GK, GK20, 20H, Hschwarz, GV10GK20Hschwarz, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Polyamide6, Nylon6, 10GV, 10BGV
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Warpage, Low Warp.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTAMID B GV10 GK20 H schwarz, PENTAMID B , PENTAMIDBGV10GK20Hschwarz, PENTAMIDB, BGV 10 GK 20 H schwarz, BGV10 GK20 H schwarz, BGV10, GV 10 GK 20 H schwarz, BGV10GK20Hschwarz, GV10 GK20 H schwarz, GV10, 10GK, GK20, 20H, Hschwarz, GV10GK20Hschwarz, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Polyamide6, Nylon6, 10GV, 10BGV

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Suggested Max Regrind		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Holding Pressure		psi
Screw L/D Ratio
Screw Compression Ratio

Notes

¹Typical properties: these are not to be construed as specifications.

PENTAMID B GV10 GK20 H schwarz

Polyamide 6

Glass Bead, 20%; Glass Fiber Reinforcement, 10%

Supplied by PENTAC Polymer GmbH