IDES Prospector Already have an account? Login Here

IDES

PENTALLOY BS 6 H natur

Acrylonitrile Butadiene Styrene + Nylon

Supplied by PENTAC Polymer GmbH

The technical datasheet with complete property values for PENTALLOY BS 6 H natur is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PA-ABS alloy, unreinforced, heat stabilised
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Heat Stabilizer
Features 
  • Good Surface Finish
  • Heat Stabilized
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Relative Permittivity (1 MHz)
 
 IEC 60250
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Additional Information
The value listed as Melting Point, ISO 3146, was tested in accordance with ISO 11357.
Tensile Strain at Break, ISO 527: >70%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PENTALLOY BS 6 H natur, PENTALLOY BS , PENTALLOYBS6Hnatur, PENTALLOYBS, BS 6 H natur, BS6 H natur, BS6, BS, BS6Hnatur, 6 H natur, 6H, Hnatur, 6Hnatur, Acrylonitrile Butadiene Styrene + Nylon, Acrylonitrile Butadiene Styrene Nylon, Acrylonitrile Butadiene Styrene : Nylon, Acrylonitrile Butadiene Styrene / Nylon, Acrylonitrile Butadiene Styrene - Nylon, Acrylonitrile Butadiene Styrene _ Nylon, Acrylonitrile Butadiene Styrene Nylon, ABS+Nylon, ABSNylon, ABS:Nylon, ABS/Nylon, ABS-Nylon, ABS_Nylon, ABS Nylon, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyreneNylon, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_Nylon, H6, 6BS
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Surface Finish.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.