INEOS LLDPE LL6430AA Ineos Polyolefins Polyethylene, Linear Low Density

Product Description

Applications
LL6430AA is suitable for high performance cast stretch film applications, in particular as an anticling layer in coextruded structures and where higher stiffness is required.

Characteristics
LL6430AA is a linear low density polyethylene copolymer containing hexene-1 as the comonomer. It offers the following properties:

high output rates

excellent overall film appearance and surface finish

good balance between stiffness and puncture resistance

We recommend that you consult your INEOS O&P Europe technical representative for further advice on the use of LL6430AA.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

Features

Antioxidant

Copolymer

Fast Molding Cycle

Good Stiffness

Hexene Comonomer

Pleasing Surface Appearance

Puncture Resistant

Uses

Film

Multilayer Film

Forms

Pellets

Processing Method

Coextrusion

Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Modulus - 1% Secant (0.79 mil, Cast Film)		psi	ISO 1184
Tensile Stress (Break, 0.79 mil, Cast Film)		psi	ISO 527-3
Tensile Elongation (Break, 0.79 mil, Cast Film)		%	ISO 1184
Dart Drop Impact (0.79 mil, Cast Film)		g	ASTM D1709A
Elmendorf Tear Strength²			ASTM D1922
MD: 0.8 mil		lbf/in
TD: 0.8 mil		lbf/in
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 0.787 mil, Cast Film)			ASTM D2457
Haze (0.787 mil, Cast Film)		%	ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LLDPE LL6430AA, INEOS LLDPE , INEOSLLDPELL6430AA, INEOSLLDPE, LLDPELL 6430 AA, LLDPELL6430AA, LLDPELL6430, LLDPE, LL 6430 AA, LL6430AA, LL6430, 6430AA, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLinearLowDensity, 6430LL, 6430LLDPELL
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Pleasing Surface Appearance, Good Stiffness, Good Puncture Resistance, Puncture Resistant, Hexene Comonomer.
Uses
Uses may also be described by the following terms: Multilayer Film, Multi-layer Film.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Cast Film

INEOS LLDPE LL6430AA

Linear Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe