IDES Prospector Already have an account? Login Here

IDES

Geo-Tech GTP-322

Polycarbonate

Supplied by Geo-Tech Polymers

The technical datasheet with complete property values for Geo-Tech GTP-322 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GTP-322 PC is a general purpose, very high melt flow de-coated polycarbonate available in regrind or pellet for light color or tinted applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Recycled Content 
  • Yes, 100%
Features 
  • General Purpose
  • High Flow
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.126 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F, 0.126 in)
psi
 ASTM D638
Flexural Modulus (73°F, 0.126 in)
psi
 ASTM D790
Flexural Strength (73°F, 0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geo-Tech GTP-322, GeoTech GTP322, Geo-Tech , GeoTech, Geo:Tech, Geo/Tech, Geo+Tech, Geo_Tech, Geo Tech, GeoTechGTP322, GTP, GTP-322, GTP322, GTP:322, GTP/322, GTP+322, GTP_322, GTP 322, Polycarbonate, PC, 322GTP
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.