IDES Prospector Already have an account? Login Here

IDES

UTTAP QU HT530 GF

Polyamide

Glass Fiber Reinforcement, 30%

Supplied by Ovation Polymers Inc.

The technical datasheet with complete property values for UTTAP QU HT530 GF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Glass reinforced (30 %) - High Temperature Polyamide Alloy, excellent chemical and electrical resistance, high stiffness, modulus and HDT.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Chemical Resistance
  • Good Electrical Properties
  • Good Stiffness
  • Medium Heat Resistance
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 3 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: UTTAP QU HT530 GF, UTTAP , UTTAPQUHT530GF, QU HT 530 GF, QU HT530 GF, QUHT, HT530, 530GF, QUHT530GF, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Ovation Polymers, PolyamideUnspecified, NylonUnspecified, HTQU
Features
Features may also be described by the following terms: Medium Heat Resistance, Good Chemical Resistance, Chemical Resistant, Good Stiffness, Good Electrical Properties.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.