IDES Prospector Already have an account? Login Here

IDES

AD majoris AT 360

Polypropylene Copolymer

Talc Filler

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris AT 360 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AT 360 is a filled talc reinforced, high molecular weight, low melt index flow rate polypropylene block copolymer with a very high stiffness at a good level of impact strength.

APPLICATIONS
AT360 is recommended for the extrusion of profiles (building, electrical, furniture and construction profiles or pipes). Products made from this material show a high dimensional stability and low process shrinkage.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler
Features 
  • Block Copolymer
  • Good Dimensional Stability
  • Good Strength
  • High Molecular Weight
  • High Stiffness
  • Low Flow
  • Low Shrinkage
Uses 
  • Building Materials
  • Construction Applications
  • Electrical Parts
  • Furniture
  • Piping
  • Profiles
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris AT 360, AD majoris , ADmajorisAT360, ADmajoris, majorisAT 360, majoris, majorisAT360, AT 360, AT360, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, PolypropyleneCopolymer, PPCopolymer, 360AT, 360majorisAT
Features
Features may also be described by the following terms: Block Copolymer, High Molecular Weight, High MW, Low Flow, Low Melt, Low MFI, High Stiffness, Good Strength, Good Dimensional Stability, Dimensionally Stable, Low Shrinkage.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.