AD majoris AT 367 AD majoris Polypropylene Copolymer (Talc Filler)

Product Description

AT 367 is a filled talc reinforced, high molecular weight, low melt index flow rate polypropylene block copolymer with a very high stiffness at a good level of impact strength and UV stabilised .

APPLICATIONS
AT367 is recommended for the extrusion of profiles (building, electrical, furniture and construction profiles or pipes). Products made from this material show a high dimensional stability and low process shrinkage.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Talc Filler

Additive

UV Stabilizer

Features

Block Copolymer

Good Dimensional Stability

Good Strength

Good UV Resistance

High Molecular Weight

High Stiffness

Low Flow

Low Shrinkage

Uses

Building Materials

Construction Applications

Electrical Parts

Furniture

Piping

Profiles

Forms

Pellets

Processing Method

Extrusion

Pipe Extrusion

Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F, Injection Molded)		psi	ISO 527-2/1
Tensile Stress (Yield, 73°F, Injection Molded)		psi	ISO 527-2/50
Tensile Strain (Yield, 73°F, Injection Molded)		%	ISO 527-2/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F, Injection Molded		ft·lb/in²
73°F, Injection Molded		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/B50
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris AT 367, AD majoris , ADmajorisAT367, ADmajoris, majorisAT 367, majoris, majorisAT367, AT 367, AT367, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, PolypropyleneCopolymer, PPCopolymer, 367AT, 367majorisAT
Features
Features may also be described by the following terms: Block Copolymer, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Molecular Weight, High MW, Low Flow, Low Melt, Low MFI, High Stiffness, Good Strength, Good Dimensional Stability, Dimensionally Stable, Low Shrinkage.
Uses
Uses may also be described by the following terms: Piping, Pipe.

Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Melt Temperature		°F
Die Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

AD majoris AT 367

Polypropylene Copolymer

Talc Filler

Supplied by AD majoris