IDES Prospector Already have an account? Login Here

IDES

AD majoris CFR 327

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris CFR 327 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Flame Retardant
  • Good Dimensional Stability
  • Halogen Free
Uses 
  • Electrical Parts
  • Electrical/Electronic Applications
 
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
UL 94
Glow Wire Flammability Index (0.0787 in)
°F
IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris CFR 327, AD majoris , ADmajorisCFR327, ADmajoris, majorisCFR 327, majoris, majorisCFR327, CFR 327, CFR327, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 327CFR, 327majorisCFR
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.