IDES Prospector Already have an account? Login Here

IDES

AD majoris CT 400

Polypropylene

Mineral Filler, 40%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris CT 400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CT 400 is a polypropylene 40% mineral filled polypropylene compound intended for injection moulding.
The product is available in natural CT 400 but other colours can be provided on request.

CT 400 is intended for components which require good long term heat resistance, it has a high heat distortion temperature, good rigidity, low shrinkage, noice and vibration absorption and good dimensional stability.

APPLICATIONS
  • Dashboard items
  • Automotive interior trims
  • Fuse and connector boxes
  • Miscellaneous electrical components
  • Technical components
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 40% Filler by Weight
Features 
  • Good Dimensional Stability
  • High Rigidity
  • Low Shrinkage
  • Medium Heat Resistance
  • Noise Damping
  • Vibration Damping
Uses 
  • Automotive Interior Trim
  • Electrical Housing
  • Electrical Parts
  • Electrical/Electronic Applications
  
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (73°F)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F, Injection Molded)
%
 ISO 527-2/50
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris CT 400, AD majoris , ADmajorisCT400, ADmajoris, majorisCT 400, majoris, majorisCT400, CT 400, CT400, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 400CT, 400majorisCT
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Medium Heat Resistance, High Rigidity, Low Shrinkage, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Electrical Housings, Electrical Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.