Already have an account? Login Here

IDES

GERMAMID 6 GF 10 H

Polyamide 6

Glass Fiber Reinforcement, 10%

Supplied by Kunststoff-Kontor-Hamburg GmbH

The technical datasheet with complete property values for GERMAMID 6 GF 10 H is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 10% Filler by Weight
Additive	Heat Stabilizer
Features	Heat Stabilized
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Water Absorption (Saturation, 73°F)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature		°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Additional Information
Maximum Use Temperature, 20000 hr: 100°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: GERMAMID 6 GF 10 H, GERMAMID , GERMAMID6GF10H, 6 GF 10 H, 6GF, GF10, 10H, 6GF10H, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Polyamide6, Nylon6, GF6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.

Notes

¹Typical properties: these are not to be construed as specifications.