IDES Prospector Already have an account? Login Here

IDES

GERMAMID B 6 GF 30 SCHWARZ

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Kunststoff-Kontor-Hamburg GmbH

The technical datasheet with complete property values for GERMAMID B 6 GF 30 SCHWARZ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
%
 ISO 294-4
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature
°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: GERMAMID B 6 GF 30 SCHWARZ, GERMAMID , GERMAMIDB6GF30SCHWARZ, B 6 GF 30 SCHWARZ, B6, 6GF, GF30, 30SCHWARZ, B6GF30SCHWARZ, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Polyamide6, Nylon6, 6B
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.