Already have an account? Login Here

IDES

GERMAMID B 6.6 GF 50

Polyamide 66

Glass Fiber Reinforcement, 50%

Supplied by Kunststoff-Kontor-Hamburg GmbH

The technical datasheet with complete property values for GERMAMID B 6.6 GF 50 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 50% Filler by Weight
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Water Absorption (Saturation, 73°F)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature		°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: GERMAMID B 6.6 GF 50, GERMAMID B 66 GF 50, GERMAMID , GERMAMIDB66GF50, B 6 6 GF 50, B 6.6 GF 50, B 66 GF 50, B6, 66, 6GF, GF50, B66GF50, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Polyamide66, Nylon66, 6B
Generic Name
Generic Name may also be described by the following terms: PA66.

Notes

¹Typical properties: these are not to be construed as specifications.

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.