IDES Prospector Already have an account? Login Here

IDES

AD majoris DFR 247

Polypropylene

Glass\Mineral, 25%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DFR 247 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DFR 247 is a halogen flame retardant compound with UL 94 V0, intended for injection moulding.
The product is available in natural (DFR 247) but other colours can be supplied on request.

APPLICATIONS
DFR 247 is intended for the injection moulding of electrical component.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass\Mineral, 25% Filler by Weight
Additive 
  • Halogen
  • UV Stabilizer
 
Features 
  • Flame Retardant
  • Good UV Resistance
  • Halogenated
Uses 
  • Electrical Parts
  • Electrical/Electronic Applications
 
Appearance 
  • Colors Available
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F, Injection Molded)
psi
ISO 527-2/50
Tensile Strain (Yield, 73°F, Injection Molded)
%
ISO 527-2/50
Flexural Modulus 2 (73°F, Injection Molded)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength     ISO 179
-22°F, Injection Molded
ft·lb/in²
 
73°F, Injection Molded
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL     UL 94
0.0630 in
 
 
0.126 in
 
 
Glow Wire Flammability Index (0.0787 in)
°F
IEC 60695-2-12
Oxygen Index
%
ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DFR 247, AD majoris , ADmajorisDFR247, ADmajoris, majorisDFR 247, majoris, majorisDFR247, DFR 247, DFR247, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 247DFR, 247majorisDFR
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Halogenated, Contains Halogen.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.