IDES Prospector Already have an account? Login Here

IDES

AD majoris DG 204C

Polypropylene

Glass Fiber Reinforcement, 20%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DG 204C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DG 204C is a 20% chemically coupled glass fibre reinforced polypropylene high performance compound intended for injection moulding.

The product is available in natural, but other colours can be provided on request.

DG 204C has been developed especially for demanding applications in automotive industry and various engineering sectors.

DG 204C has very high rigidity, good dimensional stability and good creep resistancy also at high temperatures.

APPLICATIONS
Product requiring high service temperature and extremely high mechanical strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Chemically Coupled
  • Good Creep Resistance
  • Good Dimensional Stability
  • High Rigidity
  • High Strength
Uses 
  • Automotive Applications
  • Engineered Applications
  
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (73°F, 0.0787 in)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DG 204C, AD majoris , ADmajorisDG204C, ADmajoris, majorisDG 204 C, majorisDG 204C, majorisDG204, majoris, DG 204 C, majorisDG204C, DG 204C, DG204, 204C, DG204C, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 204DG, 204majorisDG
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Rigidity, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant, High Strength.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.