IDES Prospector Already have an account? Login Here

IDES

AD majoris DG 454

Polypropylene

Glass Fiber Reinforcement, 40%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DG 454 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DG 454 is a 40% chemically coupled glass fibre reinforced polypropylene compound elastomer modified intended for injection moulding .

The product is available in natural, but other colours can be provided on request.

DG 454 has been developed especially for demanding applications in various engineering sectors.

DG 454 has high rigidity and good impact strength, good dimensional stability and good creep resistancy also at high temperatures.

APPLICATIONS
Product requiring very high overall mechanical performance such as:
  • Heater housing
  • Automotive under the bonnet components
  • Miscellaneous automotive technical items
  • Technical components

Can suitably be made from DG 454
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Chemically Coupled
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Strength
  • High Rigidity
Uses 
  • Automotive Applications
  • Automotive Electronics
  • Automotive Under the Hood
  • Electrical/Electronic Applications
  • Engineered Applications
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (73°F)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break, 73°F, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/50
Flexural Modulus (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DG 454, AD majoris , ADmajorisDG454, ADmajoris, majorisDG 454, majoris, majorisDG454, DG 454, DG454, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 454DG, 454majorisDG
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Rigidity, Good Strength, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.