IDES Prospector Already have an account? Login Here

IDES

AD majoris DM400

Polypropylene Homopolymer

Mica Filler, 40%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DM400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DM400 is a 40% mica reinforced polypropylene compound intended for injection moulding.

APPLICATIONS

Products requiring high rigidity, heat resistance, low shrinkage, high dimensional stability can suitably be made from DM400.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mica Filler, 40% Filler by Weight
Features 
  • Good Dimensional Stability
  • High Heat Resistance
  • High Rigidity
  • Low Shrinkage
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (73°F)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5
Yield, 73°F, Injection Molded
psi
  
Break, 73°F, Injection Molded
psi
  
Tensile Strain
     ISO 527-2/5
Yield, 73°F, Injection Molded
%
  
Break, 73°F, Injection Molded
%
  
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DM400, AD majoris , ADmajorisDM400, ADmajoris, majorisDM 400, majorisDM400, majoris, DM 400, DM400, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 400DM, 400majorisDM
Features
Features may also be described by the following terms: High Rigidity, High Heat Resistance, Low Shrinkage, Good Dimensional Stability, Dimensionally Stable.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.