IDES Prospector Already have an account? Login Here

IDES

AD majoris DT 208

Polypropylene

Mineral Filler, 20%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DT 208 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DT 208 is a natural, 20% mineral filled grade intended for injection moulding.

The product is available in natural (DT 208).

DT 208 has been developed especially for the laser printing, to be used in interior parts and also an excellent balance between the impact strength and stiffness, and it has very good surface quality.

APPLICATIONS
  • Appliance parts
  • Miscellaneous technical items
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 20% Filler by Weight
Features 
  • Good Stiffness
  • Good Strength
  • Good Surface Finish
  • Laser Markable
 
Uses 
  • Appliance Components
  • Electrical/Electronic Applications
 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage - Flow (73°F)
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F, Injection Molded)
psi
ISO 527-2
Tensile Strain (Yield, 73°F, Injection Molded)
%
ISO 527-2
Flexural Modulus (73°F, Injection Molded)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
    ISO 179/1eU
-4°F, Injection Molded
ft·lb/in²
 
73°F, Injection Molded
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/A
--
°F
ISO 306/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DT 208, AD majoris , ADmajorisDT208, ADmajoris, majorisDT 208, majoris, majorisDT208, DT 208, DT208, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 208DT, 208majorisDT
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Strength, Good Stiffness, Good Surface Finish.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Hold-on Pressure: 50 - 60% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.