| Acrylonitrile Styrene Acrylate (ASA)
Processing Information |
|
|
English
|
| Specific Gravity | 1.05 to 1.20 | 1.11 to 1.24 | 1.07 to 1.12 | | Mold Shrinkage, Flow (in/in) | 0.0050 to 0.0061 | 0.0049 to 0.0060 | 0.0040 to 0.0065 | | Melt Mass Flow Rate (g/10 min) | 0.20 to 2.0 | 0.50 to 35 | 5.0 to 11 | | Drying Temperature (°F) | 176 to 212 | 174 to 230 | 176 to 190 | | Drying Time (hr) | 2.9 to 4.1 | 3.0 to 4.0 | 3.5 to 4.0 | | Suggested Max Moisture (%) | 0.038 to 0.10 | 0.020 to 0.052 | 0.040 | | Suggested Max Regrind (%) | 5 to 30 | 5 to 6 | -- | | Injection Pressure (psi) | 14200 to 15200 | 14500 to 15200 | -- | | Rear Temperature (°F) | 391 to 476 | 418 to 477 | 392 to 451 | | Middle Temperature (°F) | 424 to 482 | 463 to 486 | 410 to 460 | | Front Temperature (°F) | 446 to 490 | 480 to 496 | 428 to 473 | | Nozzle Temperature (°F) | 417 to 503 | 454 to 491 | 410 to 460 | | Processing (Melt) Temp (°F) | 462 to 503 | 482 to 536 | 428 to 491 | | Mold Temperature (°F) | 131 to 163 | 140 to 176 | 149 to 163 |
SI
|
| Specific Gravity (g/cm³) | 1.05 to 1.20 | 1.11 to 1.24 | 1.07 to 1.12 | | Mold Shrinkage, Flow (cm/cm) | 0.0050 to 0.0061 | 0.0049 to 0.0060 | 0.0040 to 0.0065 | | Melt Mass Flow Rate (g/10 min) | 0.20 to 2.0 | 0.50 to 35 | 5.0 to 11 | | Drying Temperature (°C) | 80.0 to 100 | 78.8 to 110 | 80.0 to 87.5 | | Drying Time (hr) | 2.9 to 4.1 | 3.0 to 4.0 | 3.5 to 4.0 | | Suggested Max Moisture (%) | 0.038 to 0.10 | 0.020 to 0.052 | 0.040 | | Suggested Max Regrind (%) | 5 to 30 | 5 to 6 | -- | | Injection Pressure (MPa) | 97.6 to 105 | 100.0 to 105 | -- | | Rear Temperature (°C) | 199 to 247 | 214 to 247 | 200 to 233 | | Middle Temperature (°C) | 218 to 250 | 240 to 252 | 210 to 238 | | Front Temperature (°C) | 230 to 254 | 249 to 258 | 220 to 245 | | Nozzle Temperature (°C) | 214 to 262 | 235 to 255 | 210 to 238 | | Processing (Melt) Temp (°C) | 239 to 261 | 250 to 280 | 220 to 255 | | Mold Temperature (°C) | 55.0 to 72.5 | 59.8 to 80.0 | 65.0 to 72.5 |
|
|