| Polyketone (PK)
Processing Information |
|
|
English
|
| Specific Gravity | 1.24 to 1.45 | | Mold Shrinkage, Flow (in/in) | 0.014 to 0.022 | | Melt Mass Flow Rate (g/10 min) | 5.8 to 7.3 | | Drying Temperature (°F) | -- | | Drying Time (hr) | -- | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | -- | | Rear Temperature (°F) | 482 to 500 | | Middle Temperature (°F) | 491 to 500 | | Front Temperature (°F) | 500 | | Nozzle Temperature (°F) | 509 to 510 | | Processing (Melt) Temp (°F) | 428 to 500 | | Mold Temperature (°F) | 175 |
SI
|
| Specific Gravity (g/cm³) | 1.23 to 1.45 | | Mold Shrinkage, Flow (cm/cm) | 0.014 to 0.022 | | Melt Mass Flow Rate (g/10 min) | 5.8 to 7.3 | | Drying Temperature (°C) | -- | | Drying Time (hr) | -- | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | -- | | Rear Temperature (°C) | 250 to 260 | | Middle Temperature (°C) | 255 to 260 | | Front Temperature (°C) | 260 | | Nozzle Temperature (°C) | 265 to 266 | | Processing (Melt) Temp (°C) | 220 to 260 | | Mold Temperature (°C) | 79.4 |
|
|