| Polyolefin (Polyolefin)
Processing Information |
|
|
English
|
| Specific Gravity | 1.02 | 0.860 to 0.873 | 0.856 to 1.14 | | Mold Shrinkage, Flow (in/in) | 0.0060 | -- | 0.0023 to 0.014 | | Melt Mass Flow Rate (g/10 min) | 10 to 36 | 0.40 to 18 | 0.040 to 26 | | Drying Temperature (°F) | -- | -- | 164 to 167 | | Drying Time (hr) | -- | -- | 1.4 to 1.5 | | Suggested Max Moisture (%) | -- | -- | 0.050 | | Suggested Max Regrind (%) | -- | -- | 20 | | Injection Pressure (psi) | 11600 | -- | 770 to 1110 | | Rear Temperature (°F) | 401 to 509 | -- | 395 to 427 | | Middle Temperature (°F) | 419 to 536 | -- | 400 to 437 | | Front Temperature (°F) | 437 to 554 | -- | 400 to 447 | | Nozzle Temperature (°F) | 455 to 554 | -- | 410 to 441 | | Processing (Melt) Temp (°F) | 428 to 563 | -- | 208 to 433 | | Mold Temperature (°F) | 131 to 284 | -- | 85.0 to 105 |
SI
|
| Specific Gravity (g/cm³) | 1.02 | 0.858 to 0.871 | 0.854 to 1.14 | | Mold Shrinkage, Flow (cm/cm) | 0.0060 | -- | 0.0023 to 0.014 | | Melt Mass Flow Rate (g/10 min) | 10 to 36 | 0.40 to 18 | 0.040 to 26 | | Drying Temperature (°C) | -- | -- | 73.5 to 74.8 | | Drying Time (hr) | -- | -- | 1.4 to 1.5 | | Suggested Max Moisture (%) | -- | -- | 0.050 | | Suggested Max Regrind (%) | -- | -- | 20 | | Injection Pressure (MPa) | 80.0 | -- | 5.31 to 7.63 | | Rear Temperature (°C) | 205 to 265 | -- | 202 to 219 | | Middle Temperature (°C) | 215 to 280 | -- | 204 to 225 | | Front Temperature (°C) | 225 to 290 | -- | 204 to 231 | | Nozzle Temperature (°C) | 235 to 290 | -- | 210 to 227 | | Processing (Melt) Temp (°C) | 220 to 295 | -- | 97.5 to 223 | | Mold Temperature (°C) | 55.0 to 140 | -- | 29.4 to 40.7 |
|
|