IDES
Plastics   Generics   Properties   Manufacturers   Articles   Webinars
Login to Prospector
Don't have an IDES account?
Create an account now
Home > Resources > Material Properties

ISO 11359-1,-2 Test Standard Explained

Share This Page Share This Page  •  Free Access to 80,000 Datasheets

Coefficient of Linear Thermal Expansion (CLTE) - ISO 11359-1,-2

ISO 11359 Purchase and download the official ISO 11359-1,-2 test standard today!

The change in length per unit length of a material per degree of temperature change.

CLTE is measured using a thermomechanical analyzer. The specimen is held in an enclosure and is contacted by a probe leading to a displacement sensor. A small force is applied to the specimen to keep the probe in contact with the specimen.

Thermomechanical Analyzer Setup

The enclosure is brought to a starting temperature. The temperature within the enclosure is increased at a uniform rate. The expansion of the specimen is measured by the displacement sensor over the temperature range of interest.

CLTE (α) is calculated using the formula:
α = ΔL / (Lo * ΔT)
where ΔL is the change in length of the specimen,
Lo is the original length of the specimen,
and ΔT is the temperature change during the test.

ISO 10350 Note

ISO 10350 specifies that the test temperature range is to be from 23°C to 55°C.

Similar Standards


Property information for specific grades of resin are available in the Prospector.
If you already have an account, you can login here or you can register for free, instant access:

Join the IDES Network:   Email Alerts  •  Blog  •  Twitter  •  LinkedIn

Share This Page - Services - Advertise With Us - About IDES - Contact Us NA: 800-788-4668, 307-742-9227  |  EU: 0033 (0) 471 759 577 Chat ©1986- IDES