| Folder |
Category |
Property |
| General |
|
Automotive Specifications |
| General |
|
Acrylic Acid Content |
| General |
|
Additive |
| General |
|
Agency Rating |
| General |
|
Appearance |
| General |
|
Availability |
| General |
|
Distributor |
| General |
|
Features |
| General |
|
% Filler / Reinforcement |
| General |
|
Filler / Reinforcement |
| General |
|
Forms |
| General |
|
Generic Name |
| General |
|
Generic Symbol |
| General |
|
Grade |
| General |
|
Manufacturer / Supplier |
| General |
|
Material Status |
| General |
|
Methyl Acrylate Content |
| General |
|
Multi-Point Data |
| General |
|
Part Marking Code (ISO 11469) |
| General |
|
Processing Method |
| General |
|
Product Name |
| General |
|
Recycled Content |
| General |
|
Resin ID (ISO 1043) |
| General |
|
RoHS Compliance |
| General |
|
Test Standards Available |
| General |
|
Uses |
| General |
|
Vinyl Acetate Content |
| General |
|
Wire Types |
| General |
|
Recently Added Materials |
|
|
|
| ASTM |
top of page |
Learn more about Prospector's Property Search. |
| ASTM |
Physical |
1,4-cis Content |
| ASTM |
Physical |
Acrylic Acid Content |
| ASTM |
Physical |
Apparent Density (ASTM D1895) |
| ASTM |
Physical |
Bound Styrene |
| ASTM |
Physical |
Bulk Factor (ASTM D1895) |
| ASTM |
Physical |
Carbon Black Content (ASTM D1603) |
| ASTM |
Physical |
Chlorine Content |
| ASTM |
Physical |
Comonomer Content |
| ASTM |
Physical |
Density (ASTM D1505) |
| ASTM |
Physical |
Density (ASTM D4883) |
| ASTM |
Physical |
Specific Gravity (ASTM D792) |
| ASTM |
Physical |
Environmental Stress-Cracking Resistance (ASTM D1693) |
| ASTM |
Physical |
Ethylene Content |
| ASTM |
Physical |
Ethylidenenorbornene (ENB) Content |
| ASTM |
Physical |
Melt Mass-Flow Rate (MFR) (ASTM D1238) |
| ASTM |
Physical |
Melt Volume-Flow Rate (MVR) (ASTM D1238) |
| ASTM |
Physical |
Methyl Acrylate Content |
| ASTM |
Physical |
Mold Shrink, Linear-Flow (ASTM D955) |
| ASTM |
Physical |
Mold Shrink, Linear-Trans (ASTM D955) |
| ASTM |
Physical |
Mooney Viscosity (ASTM D1646) |
| ASTM |
Physical |
n-Butyl Acrylate Content |
| ASTM |
Physical |
Notched Constant Ligament Stress (NCLS) (ASTM F2136) |
| ASTM |
Physical |
Oil Type |
| ASTM |
Physical |
PVC Cell Classification (ASTM D1784) |
| ASTM |
Physical |
PVC Cell Classification (ASTM D4216) |
| ASTM |
Physical |
Vinyl Acetate Content |
| ASTM |
Physical |
Vinylnorbornene (VNB) Content (ASTM D6047) |
| ASTM |
Physical |
Water Absorption @ 24 hrs (ASTM D570) |
| ASTM |
Physical |
Water Absorption @ Equil (ASTM D570) |
| ASTM |
Physical |
Water Absorption @ Sat. (ASTM D570) |
| ASTM |
Mechanical |
Apparent Bending Modulus (ASTM D747) |
| ASTM |
Mechanical |
Coefficient of Friction (ASTM D1894) |
| ASTM |
Mechanical |
Compressive Modulus (ASTM D695) |
| ASTM |
Mechanical |
Compressive Strength (ASTM D695) |
| ASTM |
Mechanical |
Deformation Under Load (ASTM D621) |
| ASTM |
Mechanical |
Fatigue Limit (ASTM D671) |
| ASTM |
Mechanical |
Flexural Modulus (ASTM D790) |
| ASTM |
Mechanical |
Flexural Strength (ASTM D790) |
| ASTM |
Mechanical |
Flexural Strength at Break (ASTM D790) |
| ASTM |
Mechanical |
Flexural Strength at Yield (ASTM D790) |
| ASTM |
Mechanical |
Poisson's Ratio (ASTM E132) |
| ASTM |
Mechanical |
Shear Modulus (ASTM D732) |
| ASTM |
Mechanical |
Shear Strength (ASTM D732) |
| ASTM |
Mechanical |
Taber Abrasion Resistance (ASTM D1044) |
| ASTM |
Mechanical |
Tensile Elongation at Break (ASTM D638) |
| ASTM |
Mechanical |
Tensile Elongation at Break (ASTM D1708) |
| ASTM |
Mechanical |
Tensile Elongation at Yield (ASTM D638) |
| ASTM |
Mechanical |
Tensile Modulus (ASTM D638) |
| ASTM |
Mechanical |
Tensile Strength (ASTM D638) |
| ASTM |
Mechanical |
Tensile Strength at Break (ASTM D638) |
| ASTM |
Mechanical |
Tensile Strength at Break (ASTM D1708) |
| ASTM |
Mechanical |
Tensile Strength at Yield (ASTM D638) |
| ASTM |
Mechanical |
Tensile Stress (ASTM D1708) |
| ASTM |
Mechanical |
Tensile Strength, Ultimate (ASTM D638) |
| ASTM |
Mechanical |
Wear Factor (ASTM D3702) |
| ASTM |
Impact |
Charpy Notched Impact Strength (ASTM D256) |
| ASTM |
Impact |
Drop Impact Resistance (ASTM D4226) |
| ASTM |
Impact |
Gardner Impact (ASTM D3029) |
| ASTM |
Impact |
Gardner Impact (ASTM D5420) |
| ASTM |
Impact |
Instrumented Dart Impact (ASTM D3763) |
| ASTM |
Impact |
Notched Izod Impact (ASTM D256) |
| ASTM |
Impact |
Notched Izod Impact (Area) (ASTM D256) |
| ASTM |
Impact |
Reverse Notch Izod Impact (ASTM D256) |
| ASTM |
Impact |
Tensile Impact Strength (ASTM D1822) |
| ASTM |
Impact |
Unnotched Izod Impact (ASTM D256) |
| ASTM |
Impact |
Unnotched Izod Impact (Area) (ASTM D256) |
| ASTM |
Impact |
Impact Strength ( ARM) |
| ASTM |
Hardness |
Barcol Hardness (ASTM D2583) |
| ASTM |
Hardness |
Durometer Hardness (ASTM D2240) |
| ASTM |
Hardness |
IRHD Hardness (ASTM D1415) |
| ASTM |
Hardness |
Rockwell Hardness (ASTM D785) |
| ASTM |
Thermal |
Brittleness Temperature (ASTM D746) |
| ASTM |
Thermal |
CLTE, Flow (ASTM D696) |
| ASTM |
Thermal |
CLTE, Flow (ASTM E228) |
| ASTM |
Thermal |
CLTE, Flow (TMA) (ASTM E831) |
| ASTM |
Thermal |
CLTE, Transverse (ASTM D696) |
| ASTM |
Thermal |
CLTE, Transverse (ASTM E228) |
| ASTM |
Thermal |
CLTE, Transverse (TMA) (ASTM E831) |
| ASTM |
Thermal |
DTUL @ 264psi - Annealed (ASTM D648) |
| ASTM |
Thermal |
DTUL @ 264psi - Unannealed (ASTM D648) |
| ASTM |
Thermal |
DTUL @ 66psi - Annealed (ASTM D648) |
| ASTM |
Thermal |
DTUL @ 66psi - Unannealed (ASTM D648) |
| ASTM |
Thermal |
Glass Transition Temperature (DSC) ( DSC) |
| ASTM |
Thermal |
Glass Transition Temperature (ASTM E1356) |
| ASTM |
Thermal |
Max. Continuous Use Temperature (ASTM D794) |
| ASTM |
Thermal |
Melting Temperature (ASTM D3418) |
| ASTM |
Thermal |
Melting Temperature ( DSC) |
| ASTM |
Thermal |
Melting Temperature |
| ASTM |
Thermal |
Peak Crystallization Temperature (DSC) (ASTM D3418) |
| ASTM |
Thermal |
Specific Heat (ASTM C351) |
| ASTM |
Thermal |
Thermal Conductivity (ASTM C177) |
| ASTM |
Thermal |
UL Temperature Rating |
| ASTM |
Thermal |
Vicat Softening Temperature (ASTM D1525) |
| ASTM |
Electrical |
Arc Resistance (ASTM D495) |
| ASTM |
Electrical |
Arc Resistance (PLC) (ASTM D495) |
| ASTM |
Electrical |
Comparative Tracking Index (ASTM D3638) |
| ASTM |
Electrical |
Dielectric Constant (ASTM D150) |
| ASTM |
Electrical |
Dielectric Constant (ASTM D1531) |
| ASTM |
Electrical |
Dielectric Constant (ASTM D2520) |
| ASTM |
Electrical |
Dielectric Strength (ASTM D149) |
| ASTM |
Electrical |
Dissipation Factor (ASTM D150) |
| ASTM |
Electrical |
Dissipation Factor (ASTM D1531) |
| ASTM |
Electrical |
Dissipation Factor (ASTM D2520) |
| ASTM |
Electrical |
Surface Resistivity (ASTM D257) |
| ASTM |
Electrical |
Surface Resistivity (ASTM D4496) |
| ASTM |
Electrical |
Volume Resistivity (ASTM D257) |
| ASTM |
Electrical |
Volume Resistivity (ASTM D991) |
| ASTM |
Flammability |
Flame Rating - UL (UL 94) |
| ASTM |
Flammability |
Oxygen Index (ASTM D2863) |
| ASTM |
Flammability |
UL File Number |
| ASTM |
UL |
Comparative Tracking Index (CTI) (UL 746) |
| ASTM |
UL |
Comparative Tracking Index (CTI) (PLC) (UL 746) |
| ASTM |
UL |
High Amp Arc Ignition (HAI) (UL 746) |
| ASTM |
UL |
High Amp Arc Ignition (HAI) (PLC) (UL 746) |
| ASTM |
UL |
High Voltage Arc Tracking Rate (HVTR) (UL 746) |
| ASTM |
UL |
High Voltage Arc Resistance to Ignition (HVAR) (PLC) (UL 746) |
| ASTM |
UL |
High Voltage Arc Tracking Rate (HVTR) (PLC) (UL 746) |
| ASTM |
UL |
Hot-wire Ignition (HWI) (UL 746) |
| ASTM |
UL |
Hot-wire Ignition (HWI) (PLC) (UL 746) |
| ASTM |
UL |
Inclined-Plane Tracking (UL 746/ASTM D2303) |
| ASTM |
UL |
Outdoor Suitability (UL 746C) |
| ASTM |
UL |
Detergent Resistance (UL 749) |
| ASTM |
UL |
Detergent Resistance (UL 2157) |
| ASTM |
UL |
RTI Elec (UL 746) |
| ASTM |
UL |
RTI Imp (UL 746) |
| ASTM |
UL |
RTI Str (UL 746) |
| ASTM |
Optical |
Clarity (ASTM D1746) |
| ASTM |
Optical |
Gloss (20°) (ASTM D523/D2457) |
| ASTM |
Optical |
Gloss (45°) (ASTM D2457) |
| ASTM |
Optical |
Gloss (60°) (ASTM D523/D2457) |
| ASTM |
Optical |
Haze (ASTM D1003) |
| ASTM |
Optical |
Refractive Index (ASTM D542) |
| ASTM |
Optical |
Transmittance (ASTM D1003) |
| ASTM |
Optical |
Yellowness Index (ASTM D1925) |
| ASTM |
Films |
Adhesion to OPP |
| ASTM |
Films |
Blocking Load (ASTM D3354) |
| ASTM |
Films |
Carbon Dioxide Transmission Rate (ASTM D1434) |
| ASTM |
Films |
Dart Drop Impact (ASTM D1709) |
| ASTM |
Films |
Elastic Modulus MD (ASTM D882) |
| ASTM |
Films |
Elastic Modulus TD (ASTM D882) |
| ASTM |
Films |
Elmendorf Tear Strength MD (ASTM D1922) |
| ASTM |
Films |
Elmendorf Tear Strength TD (ASTM D1922) |
| ASTM |
Films |
Elongation at Break MD (ASTM D882) |
| ASTM |
Films |
Elongation at Break TD (ASTM D882) |
| ASTM |
Films |
Elongation at Yield MD (ASTM D882) |
| ASTM |
Films |
Elongation at Yield TD (ASTM D882) |
| ASTM |
Films |
Film Puncture Energy |
| ASTM |
Films |
Film Puncture Force |
| ASTM |
Films |
Film Puncture Resistance |
| ASTM |
Films |
Film Thickness - Tested |
| ASTM |
Films |
Film Toughness MD (ASTM D882) |
| ASTM |
Films |
Film Toughness TD (ASTM D882) |
| ASTM |
Films |
Flexural Modulus MD (ASTM D790) |
| ASTM |
Films |
Flexural Modulus TD (ASTM D790) |
| ASTM |
Films |
Nitrogen Transmission Rate (ASTM D1434) |
| ASTM |
Films |
Oxygen Permeability (ASTM D1434) |
| ASTM |
Films |
Oxygen Permeability (ASTM D3985) |
| ASTM |
Films |
Oxygen Transmission Rate (ASTM D3985) |
| ASTM |
Films |
Seal Strength (ASTM F88) |
| ASTM |
Films |
Secant Modulus MD (ASTM D882) |
| ASTM |
Films |
Secant Modulus TD (ASTM D882) |
| ASTM |
Films |
Tensile Strength at Break MD (ASTM D882) |
| ASTM |
Films |
Tensile Strength at Break TD (ASTM D882) |
| ASTM |
Films |
Tensile Strength at Yield MD (ASTM D882) |
| ASTM |
Films |
Tensile Strength at Yield TD (ASTM D882) |
| ASTM |
Films |
Total Energy Impact (ASTM D4272) |
| ASTM |
Films |
Water Vapor Transmission (ASTM E96) |
| ASTM |
Films |
Water Vapor Transmission Rate (ASTM F1249) |
| ASTM |
Films |
Water Vapor Transmission Rate (ASTM F1249) |
| ASTM |
Films |
Seal Initiation Temperature |
| ASTM |
Elastomers |
Bayshore Resilience (ASTM D2632) |
| ASTM |
Elastomers |
Clash-Berg Modulus (ASTM D1043) |
| ASTM |
Elastomers |
Compression Set (ASTM D395) |
| ASTM |
Elastomers |
Elongation at Break (ASTM D412) |
| ASTM |
Elastomers |
Elongation at Yield (ASTM D412) |
| ASTM |
Elastomers |
Elongation Set After Break (ASTM D412) |
| ASTM |
Elastomers |
Tear Strength (ASTM D624) |
| ASTM |
Elastomers |
Tear Strength, Split (ASTM D470) |
| ASTM |
Elastomers |
Tensile Set (ASTM D412) |
| ASTM |
Elastomers |
Tensile Strength at Break (ASTM D412) |
| ASTM |
Elastomers |
Tensile Strength at Yield (ASTM D412) |
| ASTM |
Elastomers |
Tensile Stress at 20% (ASTM D412) |
| ASTM |
Elastomers |
Tensile Stress at 50% (ASTM D412) |
| ASTM |
Elastomers |
Tensile Stress at 100% (ASTM D412) |
| ASTM |
Elastomers |
Tensile Stress at 200% (ASTM D412) |
| ASTM |
Elastomers |
Tensile Stress at 300% (ASTM D412) |
| ASTM |
Elastomers |
Tensile Stress at 500% (ASTM D412) |
| ASTM |
Fill Analysis |
Ejection Temperature |
| ASTM |
Fill Analysis |
Apparent Viscosity (ASTM D3835) |
| ASTM |
Fill Analysis |
Melt Density |
| ASTM |
Fill Analysis |
Melt Specific Heat (ASTM C351) |
| ASTM |
Fill Analysis |
Melt Thermal Conductivity (ASTM C177) |
| ASTM |
Fill Analysis |
Melt Viscosity (ASTM D3236) |
| ASTM |
Fill Analysis |
Melt Viscosity (ASTM D3835) |
| ASTM |
Fill Analysis |
No Flow Temperature |
| ASTM |
Aging |
Change in Durometer Hardness (ASTM D471) |
| ASTM |
Aging |
Change in Durometer Hardness in Air (ASTM D573) |
| ASTM |
Aging |
Change in IRHD Hardness in Air (ASTM D573) |
| ASTM |
Aging |
Change in Mass (ASTM D471) |
| ASTM |
Aging |
Change in Mass in Air (ASTM D573) |
| ASTM |
Aging |
Change in Tensile Modulus in Air (ASTM D573) |
| ASTM |
Aging |
Change in Tensile Strength (ASTM D471) |
| ASTM |
Aging |
Change in Tensile Strength in Air (ASTM D573) |
| ASTM |
Aging |
Change in Ultimate Elongation (ASTM D471) |
| ASTM |
Aging |
Change in Ultimate Elongation in Air (ASTM D573) |
| ASTM |
Aging |
Change in Volume (ASTM D471) |
| ASTM |
Aging |
Change in Volume in Air (ASTM D573) |
| ASTM |
Aging |
Continuous Upper Temperature Resistance (SAE J2236) |
| ASTM |
Thermoset |
Demold Time |
| ASTM |
Thermoset |
Post Cure Time |
| ASTM |
Thermoset |
Pot Life |
| ASTM |
Thermoset |
Shelf Life |
| ASTM |
Thermoset |
Thermoset Components |
| ASTM |
Thermoset |
Thermoset Mix Viscosity (ASTM D2393) |
|
|
|
| ISO |
top of page |
Learn more about Prospector's Property Search. |
| ISO |
Physical |
1,4-cis Content |
| ISO |
Physical |
Acrylic Acid Content |
| ISO |
Physical |
Apparent Density (ISO 60) |
| ISO |
Physical |
Bound Styrene |
| ISO |
Physical |
Chlorine Content |
| ISO |
Physical |
Comonomer Content |
| ISO |
Physical |
Density (ISO 1183) |
| ISO |
Physical |
Ethylene Content |
| ISO |
Physical |
Ethylidenenorbornene (ENB) Content |
| ISO |
Physical |
K-Value (ISO 1628-2) |
| ISO |
Physical |
Melt Mass-Flow Rate (MFR) (ISO 1133) |
| ISO |
Physical |
Melt Volume-Flow Rate (MVR) (ISO 1133) |
| ISO |
Physical |
Methyl Acrylate Content |
| ISO |
Physical |
Molding Shrinkage (ISO 294-4) |
| ISO |
Physical |
n-Butyl Acrylate Content |
| ISO |
Physical |
Oil Type |
| ISO |
Physical |
Viscosity Number (Reduced Viscosity) (ISO 1628) |
| ISO |
Physical |
Vinyl Acetate Content |
| ISO |
Physical |
Viscosity Number (ISO 307) |
| ISO |
Physical |
Water Absorption 23C/50RH (ISO 62) |
| ISO |
Physical |
Water Absorption 24h/23C (ISO 62) |
| ISO |
Physical |
Water Absorption Sat/23C (ISO 62) |
| ISO |
Mechanical |
Compressive Modulus (ISO 604) |
| ISO |
Mechanical |
Compressive Stress (ISO 604) |
| ISO |
Mechanical |
Flexural Creep Modulus 1000h (ISO 6602) |
| ISO |
Mechanical |
Flexural Creep Modulus 1h (ISO 6602) |
| ISO |
Mechanical |
Flexural Modulus (ISO 178) |
| ISO |
Mechanical |
Flexural Strength (ISO 178) |
| ISO |
Mechanical |
Nominal Tensile Strain at Break (ISO 527-2) |
| ISO |
Mechanical |
Shear Modulus (ISO 537) |
| ISO |
Mechanical |
Tensile Strain at Break (ISO 527-2) |
| ISO |
Mechanical |
Tensile Strain at Yield (ISO 527-2) |
| ISO |
Mechanical |
Tensile Stress at 50% Strain (ISO 527-2) |
| ISO |
Mechanical |
Tensile Stress at 100% Strain (ISO 527-2) |
| ISO |
Mechanical |
Tensile Stress at Break (ISO 527-2) |
| ISO |
Mechanical |
Tensile Stress at Yield (ISO 527-2) |
| ISO |
Mechanical |
Tensile Creep Modulus 1h (ISO 899-1) |
| ISO |
Mechanical |
Tensile Creep Modulus 1000h (ISO 899-1) |
| ISO |
Mechanical |
Tensile Modulus (ISO 527-2) |
| ISO |
Impact |
Charpy Notched Impact Strength (ISO 179) |
| ISO |
Impact |
Charpy Unnotched Impact Strength (ISO 179) |
| ISO |
Impact |
Multi-Axial Instrumented Impact Energy (ISO 6603-2) |
| ISO |
Impact |
Multi-Axial Instrumented Impact Peak Force (ISO 6603-2) |
| ISO |
Impact |
Notched Izod Impact Strength (ISO 180) |
| ISO |
Impact |
Tensile Impact Strength (ISO 8256) |
| ISO |
Impact |
Unnotched Izod Impact Strength (ISO 180) |
| ISO |
Impact |
Impact Strength ( ARM) |
| ISO |
Hardness |
Ball Indentation Hardness (ISO 2039-1) |
| ISO |
Hardness |
IRHD Hardness (ISO 48) |
| ISO |
Hardness |
Rockwell Hardness (ISO 2039-2) |
| ISO |
Hardness |
Shore Hardness (ISO 868) |
| ISO |
Thermal |
Accelerated Oven Ageing (ISO 4577) |
| ISO |
Thermal |
Ball Indentation Temperature (IEC 60598-1) |
| ISO |
Thermal |
Ball Pressure Test (IEC 60695-10-2) |
| ISO |
Thermal |
Brittleness Temperature (Multiple Standards) |
| ISO |
Thermal |
Coefficient of Linear Thermal Expansion, Flow (ISO 11359-2) |
| ISO |
Thermal |
Coefficient of Linear Thermal Expansion, Transverse (ISO 11359-2) |
| ISO |
Thermal |
Ductile / Brittle Transition Temperature (ISO 6603-2) |
| ISO |
Thermal |
Glass Transition Temperature (ISO 11357-2) |
| ISO |
Thermal |
Glass Transition Temperature (DSC) ( DSC) |
| ISO |
Thermal |
HDT B (0.45 MPa) Annealed (ISO 75-2/B) |
| ISO |
Thermal |
HDT B (0.45 MPa) Unannealed (ISO 75-2/B) |
| ISO |
Thermal |
HDT A (1.80 MPa) Annealed (ISO 75-2/A) |
| ISO |
Thermal |
HDT A (1.80 MPa) Unannealed (ISO 75-2/A) |
| ISO |
Thermal |
HDT C (8.00 MPa) Annealed (ISO 75-2/C) |
| ISO |
Thermal |
HDT C (8.00 MPa) Unannealed (ISO 75-2/C) |
| ISO |
Thermal |
Melting Temperature (DSC) (ISO 3146) |
| ISO |
Thermal |
Melting Temperature (ISO 11357-3) |
| ISO |
Thermal |
Melting Temperature |
| ISO |
Thermal |
Peak Crystallization Temperature (DSC) (ISO 3146) |
| ISO |
Thermal |
Peak Crystallization Temperature (ISO 11357-3) |
| ISO |
Thermal |
Thermal Conductivity (ISO 8302) |
| ISO |
Thermal |
UL Temperature Rating |
| ISO |
Thermal |
Vicat Softening Temperature (ISO 306) |
| ISO |
Aging |
Change in IRHD Hardness in Air (ISO 188) |
| ISO |
Aging |
Change in Mass (ISO 1817) |
| ISO |
Aging |
Change in Mass in Air (ISO 188) |
| ISO |
Aging |
Change in Shore Hardness (ISO 1817) |
| ISO |
Aging |
Change in Shore Hardness in Air (ISO 188) |
| ISO |
Aging |
Change in Tensile Strain at Break in Air (ISO 188) |
| ISO |
Aging |
Change in Tensile Strain at Break (ISO 1817) |
| ISO |
Aging |
Change in Tensile Stress (ISO 1817) |
| ISO |
Aging |
Change in Tensile Strength in Air (ISO 188) |
| ISO |
Aging |
Change in Volume (ISO 1817) |
| ISO |
Aging |
Change in Volume in Air (ISO 188) |
| ISO |
Aging |
Continuous Upper Temperature Resistance (SAE J2236) |
| ISO |
Electrical |
Comparative Tracking Index (IEC 60112) |
| ISO |
Electrical |
Dielectric Constant (IEC 60250) |
| ISO |
Electrical |
Dissipation Factor (IEC 60250) |
| ISO |
Electrical |
Electric Strength (IEC 60243-1) |
| ISO |
Electrical |
Needle Flame Test (IEC 60695-11-5) |
| ISO |
Electrical |
Relative Permittivity (IEC 60250) |
| ISO |
Electrical |
Surface Resistivity (IEC 60093) |
| ISO |
Electrical |
Volume Resistivity (IEC 60093) |
| ISO |
Flammability |
Burning Rate (ISO 3795) |
| ISO |
Flammability |
Flame Rating - UL (UL 94) |
| ISO |
Flammability |
Flammability Classification (IEC 60695-11-10, -20) |
| ISO |
Flammability |
Glow Wire Flammability Index (IEC 60695-2-12) |
| ISO |
Flammability |
Glow Wire Ignition Temperature (IEC 60695-2-13) |
| ISO |
Flammability |
Oxygen Index (ISO 4589-2) |
| ISO |
Flammability |
UL File Number |
| ISO |
UL |
Comparative Tracking Index (CTI) (UL 746) |
| ISO |
UL |
Comparative Tracking Index (CTI) (PLC) (UL 746) |
| ISO |
UL |
High Amp Arc Ignition (HAI) (UL 746) |
| ISO |
UL |
High Amp Arc Ignition (HAI) (PLC) (UL 746) |
| ISO |
UL |
High Voltage Arc Tracking Rate (HVTR) (UL 746) |
| ISO |
UL |
High Voltage Arc Resistance to Ignition (HVAR) (PLC) (UL 746) |
| ISO |
UL |
High Voltage Arc Tracking Rate (HVTR) (PLC) (UL 746) |
| ISO |
UL |
Hot-wire Ignition (HWI) (UL 746) |
| ISO |
UL |
Hot-wire Ignition (HWI) (PLC) (UL 746) |
| ISO |
UL |
Inclined-Plane Tracking (UL 746/ASTM D2303) |
| ISO |
UL |
Outdoor Suitability (UL 746C) |
| ISO |
UL |
Detergent Resistance (UL 749) |
| ISO |
UL |
Detergent Resistance (UL 2157) |
| ISO |
UL |
RTI Elec (UL 746) |
| ISO |
UL |
RTI Imp (UL 746) |
| ISO |
UL |
RTI Str (UL 746) |
| ISO |
Optical |
Gloss (ISO 2813) |
| ISO |
Optical |
Refractive Index (ISO 489) |
| ISO |
Films |
Dart Drop Impact (ISO 7765-1) |
| ISO |
Films |
Elmendorf Tear Strength (ISO 6383-2) |
| ISO |
Films |
Film Thickness - Tested |
| ISO |
Films |
Instrumented Dart Impact (ISO 7765-2) |
| ISO |
Films |
Seal Initiation Temperature |
| ISO |
Films |
Tensile Modulus (ISO 527-3) |
| ISO |
Films |
Tensile Strain at Break (ISO 527-3) |
| ISO |
Films |
Tensile Strain at Yield (ISO 527-3) |
| ISO |
Films |
Tensile Strength (ISO 527-3) |
| ISO |
Films |
Tensile Stress at Break (ISO 527-3) |
| ISO |
Films |
Tensile Stress at Yield (ISO 527-3) |
| ISO |
Films |
Trouser Tear Resistance (ISO 6383-1) |
| ISO |
Elastomers |
Compression Set (ISO 815) |
| ISO |
Elastomers |
Tear Strength (ISO 34-1) |
| ISO |
Elastomers |
Tensile Set (ISO 2285) |
| ISO |
Elastomers |
Tensile Strain at Break (ISO 37) |
| ISO |
Elastomers |
Tensile Stress at 20% (ISO 37) |
| ISO |
Elastomers |
Tensile Stress at 100% (ISO 37) |
| ISO |
Elastomers |
Tensile Stress at 200% (ISO 37) |
| ISO |
Elastomers |
Tensile Stress at 300% (ISO 37) |
| ISO |
Elastomers |
Tensile Stress at Break (ISO 37) |
| ISO |
Elastomers |
Tensile Stress at Yield (ISO 37) |
| ISO |
Fill Analysis |
Ejection Temperature |
| ISO |
Fill Analysis |
Melt Density |
| ISO |
Fill Analysis |
No Flow Temperature |
|
|
|
| ISO 10350 |
top of page |
Learn more about Prospector's Property Search. |
| ISO 10350 |
General |
Manufacturer / Supplier |
| ISO 10350 |
General |
Product Name |
| ISO 10350 |
General |
Grade |
| ISO 10350 |
General |
Generic Name |
| ISO 10350 |
General |
Generic Symbol |
| ISO 10350 |
General |
Test Standards Available |
| ISO 10350 |
General |
Multi-Point Data |
| ISO 10350 |
General |
Processing and delivery form |
| ISO 10350 |
General |
Additives |
| ISO 10350 |
General |
Special Characteristics |
| ISO 10350 |
Rheological Properties |
Melt volume-flow rate (ISO 1133) |
| ISO 10350 |
Rheological Properties |
Molding shrinkage (parallel) (ISO 2577) |
| ISO 10350 |
Rheological Properties |
Molding shrinkage (normal) (ISO 2577) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Tensile modulus (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Yield stress (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Yield strain (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Nominal strain at break (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Stress at 50% strain (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Stress at 100% strain (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Stress at 300% strain (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Stress at break (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Strain at break (ISO 527-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Shore A hardness (3s) (ISO 868) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Shore D hardness (15s) (ISO 868) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Tensile creep modulus (1h) (ISO 899-1) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Tensile creep modulus (1000h) (ISO 899-1) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Charpy impact strength (+23°C) (ISO 179/1eU) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Charpy impact strength (-30°C) (ISO 179/1eU) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Charpy notched impact strength (+23°C) (ISO 179/1eA) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Charpy notched impact strength (-30°C) (ISO 179/1eA) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Tensile notched impact strength (+23°C) (ISO 8256/1) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Puncture - maximum force (+23°C) (ISO 6603-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Puncture - maximum force (-30°C) (ISO 6603-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Puncture energy (+23°C) (ISO 6603-2) |
| ISO 10350 |
Mechanical properties 23°C/50%r.h. |
Puncture energy (-30°C) (ISO 6603-2) |
| ISO 10350 |
Thermal Properties |
Melting temperature (10°C/min) (ISO 11357-3) |
| ISO 10350 |
Thermal Properties |
Glass transition temperature (10°C/min) (ISO 11357-2) |
| ISO 10350 |
Thermal Properties |
Temp. of deflection under load (1.80 MPa) (ISO 75-2) |
| ISO 10350 |
Thermal Properties |
Temp. of deflection under load (0.45 MPa) (ISO 75-2) |
| ISO 10350 |
Thermal Properties |
Vicat softening temperature (50°C/h 50N) (ISO 306) |
| ISO 10350 |
Thermal Properties |
Coeff.of linear therm. expansion (parallel) (ISO 11359-2) |
| ISO 10350 |
Thermal Properties |
Coeff.of linear therm. expansion (normal) (ISO 11359-2) |
| ISO 10350 |
Thermal Properties |
Burning Behav. at 1.6mm nom. thickn. (ISO 1210) |
| ISO 10350 |
Thermal Properties |
Burning Behav. at thickness h (ISO 1210) |
| ISO 10350 |
Thermal Properties |
Burning Behav. 5V at thickness h (ISO 10351) |
| ISO 10350 |
Thermal Properties |
Oxygen index (ISO 4589-2) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Relative permittivity (100 Hz) (IEC 60250) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Relative permittivity (1 MHz) (IEC 60250) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Dissipation factor (100 Hz) (IEC 60250) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Dissipation factor (1 MHz) (IEC 60250) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Volume resistivity (IEC 60093) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Surface resistivity (IEC 60093) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Electric strength (IEC 60243-1) |
| ISO 10350 |
Electrical properties 23°C/50%r.h. |
Comparative tracking index (IEC 60112) |
| ISO 10350 |
Other properties |
Water absorption (ISO 62) |
| ISO 10350 |
Other properties |
Humidity absorption (ISO 62) |
| ISO 10350 |
Other properties |
Density (ISO 1183) |
| ISO 10350 |
Material specific properties |
Viscosity number (ISO 307, 1157, 1628) |
| ISO 10350 |
Test specimen production |
Processing conditions acc. ISO |
| ISO 10350 |
Test specimen production |
Injection Molding, melt temperature (ISO 294) |
| ISO 10350 |
Test specimen production |
Injection Molding, mold temperature (ISO 10724) |
| ISO 10350 |
Test specimen production |
Injection Molding, injection velocity (ISO 294) |
| ISO 10350 |
Test specimen production |
Injection Molding, pressure at hold (ISO 294) |
| ISO 10350 |
Test specimen production |
Compression Molding, molding temperature (ISO 293) |
| ISO 10350 |
Test specimen production |
Compression Molding, cooling rate (ISO 293) |
| ISO 10350 |
Test specimen production |
Compression Molding, molding time (ISO 293) |
| ISO 10350 |
Test specimen production |
Compression Molding, demolding temperature (ISO 293) |
|
|
|
| UL |
top of page |
Learn more about Prospector's Property Search. |
| UL |
|
UL |
| UL |
|
Flame Rating - UL (UL 94) |
| UL |
|
Comparative Tracking Index (CTI) (UL 746) |
| UL |
|
Comparative Tracking Index (CTI) (PLC) (UL 746) |
| UL |
|
High Amp Arc Ignition (HAI) (UL 746) |
| UL |
|
High Amp Arc Ignition (HAI) (PLC) (UL 746) |
| UL |
|
High Voltage Arc Resistance to Ignition (HVAR) (PLC) (UL 746) |
| UL |
|
High Voltage Arc Tracking Rate (HVTR) (UL 746) |
| UL |
|
High Voltage Arc Tracking Rate (HVTR) (PLC) (UL 746) |
| UL |
|
Hot-wire Ignition (HWI) (UL 746) |
| UL |
|
Hot-wire Ignition (HWI) (PLC) (UL 746) |
| UL |
|
Outdoor Suitability (UL 746C) |
| UL |
|
RTI Elec (UL 746) |
| UL |
|
RTI Imp (UL 746) |
| UL |
|
RTI Str (UL 746) |
| UL |
|
UL File Number |
|
|
|
| Processing |
top of page |
Learn more about Prospector's Property Search. |
| Processing |
|
Processing |
| Processing |
Injection |
Back Pressure |
| Processing |
Injection |
Clamp Tonnage |
| Processing |
Injection |
Cushion |
| Processing |
Injection |
Dew Point |
| Processing |
Injection |
Drying Temperature |
| Processing |
Injection |
Drying Time |
| Processing |
Injection |
Drying Time, Maximum |
| Processing |
Injection |
Front Temperature |
| Processing |
Injection |
Holding Pressure |
| Processing |
Injection |
Hopper Temperature |
| Processing |
Injection |
Injection Pressure |
| Processing |
Injection |
Injection Rate |
| Processing |
Injection |
Melt Temperature (Aim) |
| Processing |
Injection |
Middle Temperature |
| Processing |
Injection |
Mold Temperature |
| Processing |
Injection |
Nozzle Temperature |
| Processing |
Injection |
Processing (Melt) Temp |
| Processing |
Injection |
Rear Temperature |
| Processing |
Injection |
Screw Compression Ratio |
| Processing |
Injection |
Screw L/D Ratio |
| Processing |
Injection |
Screw Speed |
| Processing |
Injection |
Suggested Max Moisture |
| Processing |
Injection |
Suggested Max Regrind |
| Processing |
Injection |
Suggested Shot Size |
| Processing |
Injection |
Vent Depth |
| Processing |
Extrusion |
Adapter Temperature |
| Processing |
Extrusion |
Back Pressure |
| Processing |
Extrusion |
Calibration Temp, First |
| Processing |
Extrusion |
Cylinder Zone 1 Temp. |
| Processing |
Extrusion |
Cylinder Zone 2 Temp. |
| Processing |
Extrusion |
Cylinder Zone 3 Temp. |
| Processing |
Extrusion |
Cylinder Zone 4 Temp. |
| Processing |
Extrusion |
Cylinder Zone 5 Temp. |
| Processing |
Extrusion |
Die Temperature |
| Processing |
Extrusion |
Drying Temperature |
| Processing |
Extrusion |
Drying Time |
| Processing |
Extrusion |
Hopper Temperature |
| Processing |
Extrusion |
Melt Temperature |
| Processing |
Extrusion |
Melt Temperature (Aim) |
| Processing |
Extrusion |
Suggested Max Moisture |
| Processing |
Extrusion |
Take-Off Roll |
